Search Your location/language , English
M5600010 PCB Fixing Screws, M3

M5600010

PCB Fixing Screws, M3

Pack of 100 M3 x 6 mm pan head pozi drive screws. Used for fitting PCBs and mounting plates to the threaded standoffs in our standard enclosures: TECHNOMET, MINIMET

Also suitable for use in combination with M5600001 PCB Mounting Kit, to secure PCBs to the plastic mounting pillars. Fixing points are provided in the following enclosures for this kit: COMBIMET 19", VERSAMET 19", UNIMET 19", UNIDESK, UNIMET, UNIMET-PLUS, DATAMET

These screws can also be used to replace the standard slotted case assembly screws supplied with our UNICASE enclosures — if pozi drive screws are preferred.

Additionally, this screw pack may be useful if your enclosure has been customized with M3 threaded inserts and pillars.

Supply

100 M3 x 6 mm pan head fixing screws (pozi drive PZ1).

  • To be used for
M4919115 VERSAMET 19" 1Ux6.49"

M4919115

VERSAMET 19" 1Ux6.49" Modern and versatile 19" rack cases with anodized front panel and integrated 'comfort-handles'. Folded aluminum case body with all fixings hidden on the underside. Removable base and rear panel for easy access.

Supply 1U x 19" front panel, two handles, top cover, base panel, rear panel, M3 x 8 mm (x6), M3 x 8 mm (x4), M4 nut and washer (x4). Supplied assembled.

Close

M4919115

VERSAMET 19" 1Ux6.49" Aluminum
Light gray RAL 7035
1.73″x19.02″x6.50″
M4919119 VERSAMET 19" 1Ux6.49"

M4919119

VERSAMET 19" 1Ux6.49" Modern and versatile 19" rack cases with anodized front panel and integrated 'comfort-handles'. Folded aluminum case body with all fixings hidden on the underside. Removable base and rear panel for easy access.

Supply 1U x 19" front panel, two handles, top cover, base panel, rear panel, M3 x 8 mm (x6), M3 x 8 mm (x4), M4 nut and washer (x4). Supplied assembled.

Close

M4919119

VERSAMET 19" 1Ux6.49" Aluminum
Black RAL 9005
1.73″x19.02″x6.50″
M4919125 VERSAMET 19" 1Ux10.43"

M4919125

VERSAMET 19" 1Ux10.43" Modern and versatile 19" rack cases with anodized front panel and integrated 'comfort-handles'. Folded aluminum case body with all fixings hidden on the underside. Removable base and rear panel for easy access.

Supply 1U x 19" front panel, two handles, top cover, base panel, rear panel, M3 x 8 mm (x6), M3 x 8 mm (x6), M4 nut and washer (x4). Supplied assembled.

Close

M4919125

VERSAMET 19" 1Ux10.43" Aluminum
Light gray RAL 7035
1.73″x19.02″x10.43″
M4919129 VERSAMET 19" 1Ux10.43"

M4919129

VERSAMET 19" 1Ux10.43" Modern and versatile 19" rack cases with anodized front panel and integrated 'comfort-handles'. Folded aluminum case body with all fixings hidden on the underside. Removable base and rear panel for easy access.

Supply 1U x 19" front panel, two handles, top cover, base panel, rear panel, M3 x 8 mm (x6), M3 x 8 mm (x6), M4 nut and washer (x4). Supplied assembled.

Close

M4919129

VERSAMET 19" 1Ux10.43" Aluminum
Black RAL 9005
1.73″x19.02″x10.43″
M5113115 MINIMET 1

M5113115

MINIMET 1 Modern instrument case for small desktop and portable electronics. Folded aluminum top and base covers are assembled by hidden fixing screws on the underside. Front and rear apertures are recessed by 0.31" and 0.55" at the opposite ends. Order front and rear panels separately.

Supply Top cover, base panel, 4 self-adhesive non-slip feet and fixing screws. Supplied assembled.

Close

M5113115

MINIMET 1 Aluminum
Light gray RAL 7035
5.30″x5.12″x1.52″
M5113125 MINIMET 2

M5113125

MINIMET 2 Modern instrument case for small desktop and portable electronics. Folded aluminum top and base covers are assembled by hidden fixing screws on the underside. Front and rear apertures are recessed by 0.31" and 0.55" at the opposite ends. Order front and rear panels separately.

Supply Top cover, base panel, 4 self-adhesive non-slip feet and fixing screws. Supplied assembled.

Close

M5113125

MINIMET 2 Aluminum
Light gray RAL 7035
5.30″x5.12″x2.76″
M5113215 MINIMET 3

M5113215

MINIMET 3 Modern instrument case for small desktop and portable electronics. Folded aluminum top and base covers are assembled by hidden fixing screws on the underside. Front and rear apertures are recessed by 0.31" and 0.55" at the opposite ends. Order front and rear panels separately.

Supply Top cover, base panel, 4 self-adhesive non-slip feet and fixing screws. Supplied assembled.

Close

M5113215

MINIMET 3 Aluminum
Light gray RAL 7035
5.30″x7.87″x1.52″
M5113225 MINIMET 4

M5113225

MINIMET 4 Modern instrument case for small desktop and portable electronics. Folded aluminum top and base covers are assembled by hidden fixing screws on the underside. Front and rear apertures are recessed by 0.31" and 0.55" at the opposite ends. Order front and rear panels separately.

Supply Top cover, base panel, 4 self-adhesive non-slip feet and fixing screws. Supplied assembled.

Close

M5113225

MINIMET 4 Aluminum
Light gray RAL 7035
5.30″x7.87″x2.76″
M5117115 MINIMET 5

M5117115

MINIMET 5 Modern instrument case for small desktop and portable electronics. Folded aluminum top and base covers are assembled by hidden fixing screws on the underside. Front and rear apertures are recessed by 0.31" and 0.55" at the opposite ends. Order front and rear panels separately.

Supply Top cover, base panel, 4 self-adhesive non-slip feet and fixing screws. Supplied assembled.

Close

M5117115

MINIMET 5 Aluminum
Light gray RAL 7035
6.87″x6.30″x1.52″
M5117125 MINIMET 6

M5117125

MINIMET 6 Modern instrument case for small desktop and portable electronics. Folded aluminum top and base covers are assembled by hidden fixing screws on the underside. Front and rear apertures are recessed by 0.31" and 0.55" at the opposite ends. Order front and rear panels separately.

Supply Top cover, base panel, 4 self-adhesive non-slip feet and fixing screws. Supplied assembled.

Close

M5117125

MINIMET 6 Aluminum
Light gray RAL 7035
6.87″x6.30″x2.76″
M5117215 MINIMET 7

M5117215

MINIMET 7 Modern instrument case for small desktop and portable electronics. Folded aluminum top and base covers are assembled by hidden fixing screws on the underside. Front and rear apertures are recessed by 0.31" and 0.55" at the opposite ends. Order front and rear panels separately.

Supply Top cover, base panel, 4 self-adhesive non-slip feet and fixing screws. Supplied assembled.

Close

M5117215

MINIMET 7 Aluminum
Light gray RAL 7035
6.87″x9.45″x1.52″
M5117225 MINIMET 8

M5117225

MINIMET 8 Modern instrument case for small desktop and portable electronics. Folded aluminum top and base covers are assembled by hidden fixing screws on the underside. Front and rear apertures are recessed by 0.31" and 0.55" at the opposite ends. Order front and rear panels separately.

Supply Top cover, base panel, 4 self-adhesive non-slip feet and fixing screws. Supplied assembled.

Close

M5117225

MINIMET 8 Aluminum
Light gray RAL 7035
6.87″x9.45″x2.76″
M5320105 UNIDESK M200

M5320105

UNIDESK M200 Ergonomic IP 54 rated sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels. Recessed rear face for mounting switches and power and data connections. To maintain IP 54 rating, fit PCB pillars M5600001, or your own plugs to the mounting holes in the base panel.

Version With sealing gaskets (IP 54)

Supply Enclosure body, base panel, 4 IP 54 gaskets, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5320105

UNIDESK M200 Aluminum
Light gray RAL 7035
7.87″x7.87″x4.02″
IP 54
M5320109 UNIDESK M200

M5320109

UNIDESK M200 Ergonomic IP 54 rated sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels. Recessed rear face for mounting switches and power and data connections. To maintain IP 54 rating, fit PCB pillars M5600001, or your own plugs to the mounting holes in the base panel.

Version With sealing gaskets (IP 54)

Supply Enclosure body, base panel, 4 IP 54 gaskets, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5320109

UNIDESK M200 Aluminum
Black RAL 9005
7.87″x7.87″x4.02″
IP 54
M5320115 UNIDESK M200

M5320115

UNIDESK M200 Ergonomic sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels.  Recessed rear face for mounting switches and power and data connections.

Version Without sealing gaskets

Supply Enclosure body, base panel, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5320115

UNIDESK M200 Aluminum
Light gray RAL 7035
7.87″x7.87″x4.02″
M5320119 UNIDESK M200

M5320119

UNIDESK M200 Ergonomic sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels.  Recessed rear face for mounting switches and power and data connections.

Version Without sealing gaskets

Supply Enclosure body, base panel, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5320119

UNIDESK M200 Aluminum
Black RAL 9005
7.87″x7.87″x4.02″
M5330105 UNIDESK M300

M5330105

UNIDESK M300 Ergonomic IP 54 rated sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels. Recessed rear face for mounting switches and power and data connections. To maintain IP 54 rating, fit PCB pillars M5600001, or your own plugs to the mounting holes in the base panel.

Version With sealing gaskets (IP 54)

Supply Enclosure body, base panel, 4 IP 54 gaskets, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5330105

UNIDESK M300 Aluminum
Light gray RAL 7035
11.81″x7.87″x4.02″
IP 54
M5330109 UNIDESK M300

M5330109

UNIDESK M300 Ergonomic IP 54 rated sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels. Recessed rear face for mounting switches and power and data connections. To maintain IP 54 rating, fit PCB pillars M5600001, or your own plugs to the mounting holes in the base panel.

Version With sealing gaskets (IP 54)

Supply Enclosure body, base panel, 4 IP 54 gaskets, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5330109

UNIDESK M300 Aluminum
Black RAL 9005
11.81″x7.87″x4.02″
IP 54
M5330115 UNIDESK M300

M5330115

UNIDESK M300 Ergonomic sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels.  Recessed rear face for mounting switches and power and data connections.

Version Without sealing gaskets

Supply Enclosure body, base panel, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5330115

UNIDESK M300 Aluminum
Light gray RAL 7035
11.81″x7.87″x4.02″
M5330119 UNIDESK M300

M5330119

UNIDESK M300 Ergonomic sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels.  Recessed rear face for mounting switches and power and data connections.

Version Without sealing gaskets

Supply Enclosure body, base panel, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5330119

UNIDESK M300 Aluminum
Black RAL 9005
11.81″x7.87″x4.02″
M5340105 UNIDESK M400

M5340105

UNIDESK M400 Ergonomic IP 54 rated sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels. Recessed rear face for mounting switches and power and data connections. To maintain IP 54 rating, fit PCB pillars M5600001, or your own plugs to the mounting holes in the base panel.

Version With sealing gaskets (IP 54)

Supply Enclosure body, base panel, 4 IP 54 gaskets, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5340105

UNIDESK M400 Aluminum
Light gray RAL 7035
15.75″x7.87″x4.02″
IP 54
M5340109 UNIDESK M400

M5340109

UNIDESK M400 Ergonomic IP 54 rated sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels. Recessed rear face for mounting switches and power and data connections. To maintain IP 54 rating, fit PCB pillars M5600001, or your own plugs to the mounting holes in the base panel.

Version With sealing gaskets (IP 54)

Supply Enclosure body, base panel, 4 IP 54 gaskets, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5340109

UNIDESK M400 Aluminum
Black RAL 9005
15.75″x7.87″x4.02″
IP 54
M5340115 UNIDESK M400

M5340115

UNIDESK M400 Ergonomic sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels.  Recessed rear face for mounting switches and power and data connections.

Version Without sealing gaskets

Supply Enclosure body, base panel, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5340115

UNIDESK M400 Aluminum
Light gray RAL 7035
15.75″x7.87″x4.02″
M5340119 UNIDESK M400

M5340119

UNIDESK M400 Ergonomic sloping front enclosure for desktop or wall mounted electronics equipment. Pe-assembled aluminum case body with removable base panel. Front aperture for mounting the accessory front panels.  Recessed rear face for mounting switches and power and data connections.

Version Without sealing gaskets

Supply Enclosure body, base panel, 4 non-slip feet and front panel fixing screws. Supplied assembled.

Close

M5340119

UNIDESK M400 Aluminum
Black RAL 9005
15.75″x7.87″x4.02″
M5501110 UNICASE 1

M5501110

UNICASE 1 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5501110

UNICASE 1 Aluminum
Light gray RAL 7035
7.28″x7.09″x2.56″
M5501119 UNICASE 1

M5501119

UNICASE 1 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5501119

UNICASE 1 Aluminum
Black RAL 9005
7.28″x7.09″x2.56″
M5502110 UNICASE 2

M5502110

UNICASE 2 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5502110

UNICASE 2 Aluminum
Light gray RAL 7035
10.24″x9.84″x3.54″
M5502119 UNICASE 2

M5502119

UNICASE 2 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5502119

UNICASE 2 Aluminum
Black RAL 9005
10.24″x9.84″x3.54″
M5503110 UNICASE 3

M5503110

UNICASE 3 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5503110

UNICASE 3 Aluminum
Light gray RAL 7035
13.78″x9.84″x4.33″
M5503119 UNICASE 3

M5503119

UNICASE 3 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5503119

UNICASE 3 Aluminum
Black RAL 9005
13.78″x9.84″x4.33″
M5504110 UNICASE 4

M5504110

UNICASE 4 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5504110

UNICASE 4 Aluminum
Light gray RAL 7035
10.28″x11.81″x5.30″
M5504119 UNICASE 4

M5504119

UNICASE 4

Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5504119

UNICASE 4 Aluminum
Black RAL 9005
10.28″x11.81″x5.30″
M5505110 UNICASE 5

M5505110

UNICASE 5 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5505110

UNICASE 5 Aluminum
Light gray RAL 7035
14.45″x11.81″x5.30″
M5505119 UNICASE 5

M5505119

UNICASE 5 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5505119

UNICASE 5 Aluminum
Black RAL 9005
14.45″x11.81″x5.30″
M5506110 UNICASE 6

M5506110

UNICASE 6 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5506110

UNICASE 6 Aluminum
Light gray RAL 7035
18.66″x11.81″x5.30″
M5506119 UNICASE 6

M5506119

UNICASE 6 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5506119

UNICASE 6 Aluminum
Black RAL 9005
18.66″x11.81″x5.30″
M5511110 UNICASE SL1

M5511110

UNICASE SL1 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5511110

UNICASE SL1 Aluminum
Light gray RAL 7035
5.12″x7.09″x1.97″
M5511119 UNICASE SL1

M5511119

UNICASE SL1 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5511119

UNICASE SL1 Aluminum
Black RAL 9005
5.12″x7.09″x1.97″
M5512110 UNICASE SL2

M5512110

UNICASE SL2 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5512110

UNICASE SL2 Aluminum
Light gray RAL 7035
7.28″x9.84″x1.97″
M5512119 UNICASE SL2

M5512119

UNICASE SL2 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5512119

UNICASE SL2 Aluminum
Black RAL 9005
7.28″x9.84″x1.97″
M5513110 UNICASE SL3

M5513110

UNICASE SL3 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5513110

UNICASE SL3 Aluminum
Light gray RAL 7035
9.84″x9.84″x1.97″
M5513119 UNICASE SL3

M5513119

UNICASE SL3 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5513119

UNICASE SL3 Aluminum
Black RAL 9005
9.84″x9.84″x1.97″
M5514110 UNICASE SL4

M5514110

UNICASE SL4 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5514110

UNICASE SL4 Aluminum
Light gray RAL 7035
9.84″x11.81″x1.97″
M5514119 UNICASE SL4

M5514119

UNICASE SL4 Attractive and highly versatile aluminum enclosure for desktop or portable electronics. Total access design with removable top and base for easier equipping. Internal PCB chassis has four guide rail positions for the PCBs. Two anodized aluminum front/rear panels included, plus 4 non-slip rubber feet. Simple assembly in just a few minutes.

Supply Top cover, base cover, assembly extrusions (x2), front/rear panel (x2), non-slip grey rubber foot (x4), M3 x 6 mm (x16), M3 slide-in nut (x8).

Close

M5514119

UNICASE SL4 Aluminum
Black RAL 9005
9.84″x11.81″x1.97″
M5600001 PCB mounting kit

M5600001

PCB mounting kit Kit of ten M3 plastic PCB mounting pillars which can be positioned anywhere in the enclosure. Pillar height 10 mm. Fits to Ø3.2 mm hole in the case panel. Supplied with M3 fixing screws to secure to base panel.

If PCB or mounting plate fixing screws are required please see our screw kit M5600010.

Supply 10 Nylon PCB pillars and 10 M3 x 6 mm fixing screws.

Close

M5600001

PCB mounting kit PA 6
Black RAL 9005
M5619225 UNIMET 19" 2Ux11.02"

M5619225

UNIMET 19" 2Ux11.02" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619225

UNIMET 19" 2Ux11.02" Aluminum
Light gray/window gray RAL 7035/7040
3.46″x19.00″x11.02″
M5619235 UNIMET 19" 2Ux14.96"

M5619235

UNIMET 19" 2Ux14.96" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619235

UNIMET 19" 2Ux14.96" Aluminum
Light gray/window gray RAL 7035/7040
3.46″x19.00″x14.96″
M5619325 UNIMET 19" 3Ux11.02"

M5619325

UNIMET 19" 3Ux11.02" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619325

UNIMET 19" 3Ux11.02" Aluminum
Light gray/window gray RAL 7035/7040
5.22″x19.00″x11.02″
M5619335 UNIMET 19" 3Ux14.96"

M5619335

UNIMET 19" 3Ux14.96" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619335

UNIMET 19" 3Ux14.96" Aluminum
Light gray/window gray RAL 7035/7040
5.22″x19.00″x14.96″
M5623005 UNIMET 1

M5623005

UNIMET 1 Modern instrument enclosure for desktop electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version Without handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x2), M3 x 8 mm (x4). Supplied assembled.

Close

M5623005

UNIMET 1 Aluminum
Light gray/window gray RAL 7035/7040
9.06″x7.48″x1.97″
M5623015 UNIMET-PLUS 1

M5623015

UNIMET-PLUS 1 Advanced instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the fabricated case body. Pre-assembled internal chassis supplied with four snap-in PCB guides. Two standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x4). Supplied assembled.

Close

M5623015

UNIMET-PLUS 1 Aluminum
Light gray/window gray RAL 7035/7040
9.06″x7.60″x1.97″
M5623025 UNIMET 1H

M5623025

UNIMET 1H Modern instrument enclosure with handle/bail arm for desktop and portable electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The handle/bail arm can be indexed at 30° increments.The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version With handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x2), M3 x 8 mm (x4). Supplied assembled.

Close

M5623025

UNIMET 1H Aluminum
Light gray/window gray RAL 7035/7040
9.06″x7.48″x1.97″
M5623035 UNIMET-PLUS 1H

M5623035

UNIMET-PLUS 1H Advanced instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the fabricated case body. The handle can be indexed at 30° increments.Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x4). Supplied assembled.

Close

M5623035

UNIMET-PLUS 1H Aluminum
Light gray/window gray RAL 7035/7040
9.06″x7.60″x1.97″
M5623105 UNIMET 2

M5623105

UNIMET 2 Modern instrument enclosure for desktop electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version Without handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x4), M3 x 8 mm (x4). Supplied assembled.

Close

M5623105

UNIMET 2 Aluminum
Light gray/window gray RAL 7035/7040
9.06″x7.48″x3.35″
M5623115 UNIMET-PLUS 2

M5623115

UNIMET-PLUS 2 Advanced instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the fabricated case body. Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5623115

UNIMET-PLUS 2 Aluminum
Light gray/window gray RAL 7035/7040
9.06″x7.60″x3.35″
M5623125 UNIMET 2H

M5623125

UNIMET 2H Modern instrument enclosure with handle/bail arm for desktop and portable electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The handle/bail arm can be indexed at 30° increments.The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version With handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x2), M3 x 8 mm (x4). Supplied assembled.

Close

M5623125

UNIMET 2H Aluminum
Light gray/window gray RAL 7035/7040
9.06″x7.48″x3.35″
M5623135 UNIMET-PLUS 2H

M5623135

UNIMET-PLUS 2H Advanced instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the fabricated case body. The handle can be indexed at 30° increments.Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5623135

UNIMET-PLUS 2H Aluminum
Light gray/window gray RAL 7035/7040
9.06″x7.60″x3.35″
M5625105 UNIMET 3

M5625105

UNIMET 3 Modern instrument enclosure for desktop electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version Without handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x4), M3 x 8 mm (x4). Supplied assembled.

Close

M5625105

UNIMET 3 Aluminum
Light gray/window gray RAL 7035/7040
9.84″x10.24″x3.35″
M5625115 UNIMET-PLUS 3

M5625115

UNIMET-PLUS 3 Advanced instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the fabricated case body. Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5625115

UNIMET-PLUS 3 Aluminum
Light gray/window gray RAL 7035/7040
9.84″x10.35″x3.35″
M5625125 UNIMET 3H

M5625125

UNIMET 3H Modern instrument enclosure with handle/bail arm for desktop and portable electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The handle/bail arm can be indexed at 30° increments.The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version With handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x2), M3 x 8 mm (x4). Supplied assembled.

Close

M5625125

UNIMET 3H Aluminum
Light gray/window gray RAL 7035/7040
9.84″x10.24″x3.35″
M5625135 UNIMET-PLUS 3H

M5625135

UNIMET-PLUS 3H Advanced instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the fabricated case body. The handle can be indexed at 30° increments.Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5625135

UNIMET-PLUS 3H Aluminum
Light gray/window gray RAL 7035/7040
9.84″x10.35″x3.35″
M5625305 UNIMET 5

M5625305

UNIMET 5 Modern instrument enclosure for desktop electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version Without handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x4), M3 x 8 mm (x4). Supplied assembled.

Close

M5625305

UNIMET 5 Aluminum
Light gray/window gray RAL 7035/7040
9.84″x10.24″x5.91″
M5625315 UNIMET-PLUS 5

M5625315

UNIMET-PLUS 5 Advanced instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the fabricated case body. Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5625315

UNIMET-PLUS 5 Aluminum
Light gray/window gray RAL 7035/7040
9.84″x10.35″x5.91″
M5625325 UNIMET 5H

M5625325

UNIMET 5H Modern instrument enclosure with handle/bail arm for desktop and portable electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The handle/bail arm can be indexed at 30° increments.The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version With handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x2), M3 x 8 mm (x4). Supplied assembled.

Close

M5625325

UNIMET 5H Aluminum
Light gray/window gray RAL 7035/7040
9.84″x10.24″x5.91″
M5625335 UNIMET-PLUS 5H

M5625335

UNIMET-PLUS 5H Advanced instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the fabricated case body. The handle can be indexed at 30° increments.Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5625335

UNIMET-PLUS 5H Aluminum
Light gray/window gray RAL 7035/7040
9.84″x10.35″x5.91″
M5635205 UNIMET 4

M5635205

UNIMET 4 Modern instrument enclosure for desktop electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version Without handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x4), M3 x 8 mm (x4). Supplied assembled.

Close

M5635205

UNIMET 4 Aluminum
Light gray/window gray RAL 7035/7040
13.78″x10.24″x4.72″
M5635215 UNIMET-PLUS 4

M5635215

UNIMET-PLUS 4 Advanced instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the fabricated case body. Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5635215

UNIMET-PLUS 4 Aluminum
Light gray/window gray RAL 7035/7040
13.78″x10.35″x4.72″
M5635225 UNIMET 4H

M5635225

UNIMET 4H Modern instrument enclosure with handle/bail arm for desktop and portable electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The handle/bail arm can be indexed at 30° increments.The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version With handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x2), M3 x 8 mm (x4). Supplied assembled.

Close

M5635225

UNIMET 4H Aluminum
Light gray/window gray RAL 7035/7040
13.78″x10.24″x4.72″
M5635235 UNIMET-PLUS 4H

M5635235

UNIMET-PLUS 4H Advanced instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the fabricated case body. The handle can be indexed at 30° increments.Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5635235

UNIMET-PLUS 4H Aluminum
Light gray/window gray RAL 7035/7040
13.78″x10.35″x4.72″
M5635305 UNIMET 6

M5635305

UNIMET 6 Modern instrument enclosure for desktop electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The base and rear panels are removable for easy access. Mounting holes in base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version Without handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x4), M3 x 8 mm (x4). Supplied assembled.

Close

M5635305

UNIMET 6 Aluminum
Light gray/window gray RAL 7035/7040
13.78″x10.24″x5.91″
M5635315 UNIMET-PLUS 6

M5635315

UNIMET-PLUS 6 Advanced instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the fabricated case body. Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5635315

UNIMET-PLUS 6 Aluminum
Light gray/window gray RAL 7035/7040
13.78″x10.35″x5.91″
M5635325 UNIMET 6H

M5635325

UNIMET 6H Modern instrument enclosure with handle/bail arm for desktop and portable electronics. Highly attractive die cast front bezel is fitted to the fabricated case body. The handle/bail arm can be indexed at 30° increments.The base and rear panels are removable for easy access. Mounting holes in the base are designed for fitting the accessory PCB pillars. Order the front panel separately.

Version With handle/bail arm

Supply Front bezel, top cover, base panel, rear panel, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x2), M3 x 8 mm (x4). Supplied assembled.

Close

M5635325

UNIMET 6H Aluminum
Light gray/window gray RAL 7035/7040
13.78″x10.24″x5.91″
M5635335 UNIMET-PLUS 6H

M5635335

UNIMET-PLUS 6H Advanced instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the fabricated case body. The handle can be indexed at 30° increments.Pre-assembled internal chassis supplied with four snap-in PCB guides. Four standard guide positions - additional positions can be punched on demand. The case is supplied with a rear panel and four non-slip feet. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, 4 nylon PCB guides, carry handle/bail arm kit, non-slip self-adhesive foot (x4), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M5635335

UNIMET-PLUS 6H Aluminum
Light gray/window gray RAL 7035/7040
13.78″x10.35″x5.91″
M5825105 Datamet S

M5825105

Datamet S Modern aluminum wall mount enclosure for indoor electronics equipment. The enclosure provides total access to the electronics during installation on the wall. Stylish design with die cast front bezel, top cover and 'L' shape rear section. Order front panels separately.

Supply Front bezel, top panel, L shaped rear section, assembly screws, front panel screws.

Close

M5825105

Datamet S Aluminum
Light gray/window gray RAL 7035/7040
9.84″x7.09″x4.59″
M5825109 Datamet S

M5825109

Datamet S Modern aluminum wall mount enclosure for indoor electronics equipment. The enclosure provides total access to the electronics during installation on the wall. Stylish design with die cast front bezel, top cover and 'L' shape rear panel. Order front panels separately.

Supply Front bezel, top panel, L shaped rear section, assembly screws, front panel screws.

Close

M5825109

Datamet S Aluminum
Black RAL 9005
9.84″x7.09″x4.59″
M5835105 Datamet M

M5835105

Datamet M Modern aluminum wall mount enclosure for indoor electronics equipment. The enclosure provides total access to the electronics during installation on the wall. Stylish design with die cast front bezel, top cover and 'L' shape rear panel. Order front panels separately.

Supply Front bezel, top panel, L shaped rear section, assembly screws, front panel screws.

Close

M5835105

Datamet M Aluminum
Light gray/window gray RAL 7035/7040
13.78″x9.84″x4.59″
M5835109 Datamet M

M5835109

Datamet M Modern aluminum wall mount enclosure for indoor electronics equipment. The enclosure provides total access to the electronics during installation on the wall. Stylish design with die cast front bezel, top cover and 'L' shape rear panel. Order front panels separately.

Supply Front bezel, top panel, L shaped rear section, assembly screws, front panel screws.

Close

M5835109

Datamet M Aluminum
Black RAL 9005
13.78″x9.84″x4.59″
M5840105 Datamet L

M5840105

Datamet L Modern aluminum wall mount enclosure for indoor electronics equipment. The enclosure provides total access to the electronics during installation on the wall. Stylish design with die cast front bezel, top cover and 'L' shape rear panel. Order front panels separately.

Supply Front bezel, top panel, L shaped rear section, assembly screws, front panel screws.

Close

M5840105

Datamet L Aluminum
Light gray/window gray RAL 7035/7040
15.75″x11.81″x4.59″
M5840109 Datamet L

M5840109

Datamet L Modern aluminum wall mount enclosure for indoor electronics equipment. The enclosure provides total access to the electronics during installation on the wall. Stylish design with die cast front bezel, top cover and 'L' shape rear panel. Order front panels separately.

Supply Front bezel, top panel, L shaped rear section, assembly screws, front panel screws.

Close

M5840109

Datamet L Aluminum
Black RAL 9005
15.75″x11.81″x4.59″
M6219115 COMBIMET 19" 1Ux10.43"

M6219115

COMBIMET 19" 1Ux10.43" Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Unventilated, solid top cover

Supply 19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219115

COMBIMET 19" 1Ux10.43" Aluminum
Light gray RAL 7035
1.72″x19.00″x10.43″
M6219119 COMBIMET 19" 1Ux10.43"

M6219119

COMBIMET 19" 1Ux10.43" Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Unventilated, solid top cover

Supply 19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219119

COMBIMET 19" 1Ux10.43" Aluminum
Black RAL 9005
1.72″x19.00″x10.43″
M6219125 COMBIMET 19" 1Ux14.37"

M6219125

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Unventilated, solid top cover

Supply 19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219125

COMBIMET 19" 1Ux14.37" Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219129 COMBIMET 19" 1Ux14.37"

M6219129

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Unventilated, solid top cover

Supply 19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219129

COMBIMET 19" 1Ux14.37" Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219135 COMBIMET 19" 1Ux10.43"

M6219135

COMBIMET 19" 1Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219135

COMBIMET 19" 1Ux10.43" Aluminum
Light gray RAL 7035
1.72″x19.00″x10.43″
M6219139 COMBIMET 19" 1Ux10.43"

M6219139

COMBIMET 19" 1Ux10.43" Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219139

COMBIMET 19" 1Ux10.43" Aluminum
Black RAL 9005
1.72″x19.00″x10.43″
M6219145 COMBIMET 19" 1Ux10.43"

M6219145

COMBIMET 19" 1Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, ventilated top panel, ventilated base panel, 2 side panels, 2 handle extrusions, fixing screws. Supplied fully assembled.

Close

M6219145

COMBIMET 19" 1Ux10.43" Aluminum
Light gray RAL 7035
1.72″x19.00″x10.43″
M6219149 COMBIMET 19" 1Ux10.43"

M6219149

COMBIMET 19" 1Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219149

COMBIMET 19" 1Ux10.43" Aluminum
Black RAL 9005
1.72″x19.00″x10.43″
M6219155 COMBIMET 19" 1Ux14.37"

M6219155

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219155

COMBIMET 19" 1Ux14.37" Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219159 COMBIMET 19" 1Ux14.37"

M6219159

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219159

COMBIMET 19" 1Ux14.37" Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219165 COMBIMET 19" 1Ux14.37"

M6219165

COMBIMET 19" 1Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219165

COMBIMET 19" 1Ux14.37" Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219169 COMBIMET 19" 1Ux14.37"

M6219169

COMBIMET 19" 1Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219169

COMBIMET 19" 1Ux14.37" Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219179 COMBIMET 19" 1Ux24"

M6219179

COMBIMET 19" 1Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219179

COMBIMET 19" 1Ux24" Aluminum
Black RAL 9005
1.72″x19.00″x24.00″
M6219189 COMBIMET 19" 1Ux24"

M6219189

COMBIMET 19" 1Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219189

COMBIMET 19" 1Ux24" Aluminum
Black RAL 9005
1.72″x19.00″x24.00″
M6219235 COMBIMET 19" 2Ux10.43"

M6219235

COMBIMET 19" 2Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219235

COMBIMET 19" 2Ux10.43" Aluminum
Light gray RAL 7035
3.47″x19.00″x10.43″
M6219239 COMBIMET 19" 2Ux10.43"

M6219239

COMBIMET 19" 2Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219239

COMBIMET 19" 2Ux10.43" Aluminum
Black RAL 9005
3.47″x19.00″x10.43″
M6219245 COMBIMET 19" 2Ux10.43"

M6219245

COMBIMET 19" 2Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219245

COMBIMET 19" 2Ux10.43" Aluminum
Light gray RAL 7035
3.47″x19.00″x10.43″
M6219249 COMBIMET 19" 2Ux10.43"

M6219249

COMBIMET 19" 2Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219249

COMBIMET 19" 2Ux10.43" Aluminum
Black RAL 9005
3.47″x19.00″x10.43″
M6219255 COMBIMET 19" 2Ux14.37"

M6219255

COMBIMET 19" 2Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219255

COMBIMET 19" 2Ux14.37" Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6219259 COMBIMET 19" 2Ux14.37"

M6219259

COMBIMET 19" 2Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219259

COMBIMET 19" 2Ux14.37" Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6219265 COMBIMET 19" 2Ux14.37"

M6219265

COMBIMET 19" 2Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219265

COMBIMET 19" 2Ux14.37" Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6219269 COMBIMET 19" 2Ux14.37"

M6219269

COMBIMET 19" 2Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219269

COMBIMET 19" 2Ux14.37" Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6219279 COMBIMET 19" 2Ux24"

M6219279

COMBIMET 19" 2Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219279

COMBIMET 19" 2Ux24" Aluminum
Black RAL 9005
3.47″x19.00″x24.00″
M6219289 COMBIMET 19" 2Ux24"

M6219289

COMBIMET 19" 2Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219289

COMBIMET 19" 2Ux24" Aluminum
Black RAL 9005
3.47″x19.00″x24.00″
M6219335 COMBIMET 19" 3Ux10.43"

M6219335

COMBIMET 19" 3Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219335

COMBIMET 19" 3Ux10.43" Aluminum
Light gray RAL 7035
5.22″x19.00″x10.43″
M6219339 COMBIMET 19" 3Ux10.43"

M6219339

COMBIMET 19" 3Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219339

COMBIMET 19" 3Ux10.43" Aluminum
Black RAL 9005
5.22″x19.00″x10.43″
M6219345 COMBIMET 19" 3Ux10.43"

M6219345

COMBIMET 19" 3Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219345

COMBIMET 19" 3Ux10.43" Aluminum
Light gray RAL 7035
5.22″x19.00″x10.43″
M6219349 COMBIMET 19" 3Ux10.43"

M6219349

COMBIMET 19" 3Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219349

COMBIMET 19" 3Ux10.43" Aluminum
Black RAL 9005
5.22″x19.00″x10.43″
M6219355 COMBIMET 19" 3Ux14.37"

M6219355

COMBIMET 19" 3Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219355

COMBIMET 19" 3Ux14.37" Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6219359 COMBIMET 19" 3Ux14.37"

M6219359

COMBIMET 19" 3Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219359

COMBIMET 19" 3Ux14.37" Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219365 COMBIMET 19" 3Ux14.37"

M6219365

COMBIMET 19" 3Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219365

COMBIMET 19" 3Ux14.37" Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6219369 COMBIMET 19" 3Ux14.37"

M6219369

COMBIMET 19" 3Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219369

COMBIMET 19" 3Ux14.37" Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219379 COMBIMET 19" 3Ux24"

M6219379

COMBIMET 19" 3Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219379

COMBIMET 19" 3Ux24" Aluminum
Black RAL 9005
5.22″x19.00″x24.00″
M6219389 COMBIMET 19" 3Ux24"

M6219389

COMBIMET 19" 3Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219389

COMBIMET 19" 3Ux24" Aluminum
Black RAL 9005
5.22″x19.00″x24.00″
M6219435 COMBIMET 19" 4Ux10.43"

M6219435

COMBIMET 19" 4Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219435

COMBIMET 19" 4Ux10.43" Aluminum
Light gray RAL 7035
6.97″x19.00″x10.43″
M6219439 COMBIMET 19" 4Ux10.43"

M6219439

COMBIMET 19" 4Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219439

COMBIMET 19" 4Ux10.43" Aluminum
Black RAL 9005
6.97″x19.00″x10.43″
M6219445 COMBIMET 19" 4Ux10.43"

M6219445

COMBIMET 19" 4Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219445

COMBIMET 19" 4Ux10.43" Aluminum
Light gray RAL 7035
6.97″x19.00″x10.43″
M6219449 COMBIMET 19" 4Ux10.43"

M6219449

COMBIMET 19" 4Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219449

COMBIMET 19" 4Ux10.43" Aluminum
Black RAL 9005
6.97″x19.00″x10.43″
M6219455 COMBIMET 19" 4Ux14.37"

M6219455

COMBIMET 19" 4Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219455

COMBIMET 19" 4Ux14.37" Aluminum
Light gray RAL 7035
6.97″x19.00″x14.37″
M6219459 COMBIMET 19" 4Ux14.37"

M6219459

COMBIMET 19" 4Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219459

COMBIMET 19" 4Ux14.37" Aluminum
Black RAL 9005
6.97″x19.00″x14.37″
M6219465 COMBIMET 19" 4Ux14.37"

M6219465

COMBIMET 19" 4Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219465

COMBIMET 19" 4Ux14.37" Aluminum
Light gray RAL 7035
6.97″x19.00″x14.37″
M6219469 COMBIMET 19" 4Ux14.37"

M6219469

COMBIMET 19" 4Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219469

COMBIMET 19" 4Ux14.37" Aluminum
Black RAL 9005
6.97″x19.00″x14.37″
M6219479 COMBIMET 19" 4Ux24"

M6219479

COMBIMET 19" 4Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219479

COMBIMET 19" 4Ux24" Aluminum
Black RAL 9005
6.97″x19.00″x24.00″
M6219489 COMBIMET 19" 4Ux24"

M6219489

COMBIMET 19" 4Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219489

COMBIMET 19" 4Ux24" Aluminum
Black RAL 9005
6.97″x19.00″x24.00″
M6219535 COMBIMET 19" 5Ux10.43"

M6219535

COMBIMET 19" 5Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219535

COMBIMET 19" 5Ux10.43" Aluminum
Light gray RAL 7035
8.70″x19.00″x10.43″
M6219539 COMBIMET 19" 5Ux10.43"

M6219539

COMBIMET 19" 5Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219539

COMBIMET 19" 5Ux10.43" Aluminum
Black RAL 9005
8.70″x19.00″x10.43″
M6219545 COMBIMET 19" 5Ux10.43"

M6219545

COMBIMET 19" 5Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219545

COMBIMET 19" 5Ux10.43" Aluminum
Light gray RAL 7035
8.70″x19.00″x10.43″
M6219549 COMBIMET 19" 5Ux10.43"

M6219549

COMBIMET 19" 5Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219549

COMBIMET 19" 5Ux10.43" Aluminum
Black RAL 9005
8.70″x19.00″x10.43″
M6219555 COMBIMET 19" 5Ux14.37"

M6219555

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219555

COMBIMET 19" 5Ux14.37" Aluminum
Light gray RAL 7035
8.70″x19.00″x14.37″
M6219559 COMBIMET 19" 5Ux14.37"

M6219559

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219559

COMBIMET 19" 5Ux14.37" Aluminum
Black RAL 9005
8.70″x19.00″x14.37″
M6219565 COMBIMET 19" 5Ux14.37"

M6219565

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219565

COMBIMET 19" 5Ux14.37" Aluminum
Light gray RAL 7035
8.70″x19.00″x14.37″
M6219569 COMBIMET 19" 5Ux14.37"

M6219569

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219569

COMBIMET 19" 5Ux14.37" Aluminum
Black RAL 9005
8.70″x19.00″x14.37″
M6219579 COMBIMET 19" 5Ux24"

M6219579

COMBIMET 19" 5Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219579

COMBIMET 19" 5Ux24" Aluminum
Black RAL 9005
8.70″x19.00″x24.00″
M6219589 COMBIMET 19" 5Ux24"

M6219589

COMBIMET 19" 5Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219589

COMBIMET 19" 5Ux24" Aluminum
Black RAL 9005
8.70″x19.00″x24.00″
M6219635 COMBIMET 19" 6Ux10.43"

M6219635

COMBIMET 19" 6Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219635

COMBIMET 19" 6Ux10.43" Aluminum
Light gray RAL 7035
10.47″x19.00″x10.43″
M6219639 COMBIMET 19" 6Ux10.43"

M6219639

COMBIMET 19" 6Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219639

COMBIMET 19" 6Ux10.43" Aluminum
Black RAL 9005
10.47″x19.00″x10.43″
M6219645 COMBIMET 19" 6Ux10.43"

M6219645

COMBIMET 19" 6Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219645

COMBIMET 19" 6Ux10.43" Aluminum
Light gray RAL 7035
10.47″x19.00″x10.43″
M6219649 COMBIMET 19" 6Ux10.43"

M6219649

COMBIMET 19" 6Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219649

COMBIMET 19" 6Ux10.43" Aluminum
Black RAL 9005
10.47″x19.00″x10.43″
M6219655 COMBIMET 19" 6Ux14.37"

M6219655

COMBIMET 19" 6Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219655

COMBIMET 19" 6Ux14.37" Aluminum
Light gray RAL 7035
10.47″x19.00″x14.37″
M6219659 COMBIMET 19" 6Ux14.37"

M6219659

COMBIMET 19" 6Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219659

COMBIMET 19" 6Ux14.37" Aluminum
Black RAL 9005
10.47″x19.00″x14.37″
M6219665 COMBIMET 19" 6Ux14.37"

M6219665

COMBIMET 19" 6Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219665

COMBIMET 19" 6Ux14.37" Aluminum
Light gray RAL 7035
10.47″x19.00″x14.37″
M6219669 COMBIMET 19" 6Ux14.37"

M6219669

COMBIMET 19" 6Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219669

COMBIMET 19" 6Ux14.37" Aluminum
Black RAL 9005
10.47″x19.00″x14.37″
M6219679 COMBIMET 19" 6Ux24"

M6219679

COMBIMET 19" 6Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x6), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219679

COMBIMET 19" 6Ux24" Aluminum
Black RAL 9005
10.47″x19.00″x24.00″
M6219689 COMBIMET 19" 6Ux24"

M6219689

COMBIMET 19" 6Ux24" Modern ventilated aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x6), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219689

COMBIMET 19" 6Ux24" Aluminum
Black RAL 9005
10.47″x19.00″x24.00″
M6422024 Technomet R107

M6422024

Technomet R107 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base panel. The internal chassis can also be fitted with 3 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB).The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6422024

Technomet R107 Aluminum
Anthracite RAL 7016
8.86″x7.87″x2.95″
M6422025 Technomet R107

M6422025

Technomet R107 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 3 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB). The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6422025

Technomet R107 Aluminum
Light gray RAL 7035
8.86″x7.87″x2.95″
M6422034 Technomet R107H

M6422034

Technomet R107H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 3 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6422034

Technomet R107H Aluminum
Anthracite RAL 7016
8.86″x7.87″x2.95″
M6422035 Technomet R107H

M6422035

Technomet R107H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 3 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6422035

Technomet R107H Aluminum
Light gray RAL 7035
8.86″x7.87″x2.95″
M6422124 Technomet R110

M6422124

Technomet R110 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6422124

Technomet R110 Aluminum
Anthracite RAL 7016
8.86″x7.87″x3.94″
M6422125 Technomet R110

M6422125

Technomet R110 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6422125

Technomet R110 Aluminum
Light gray RAL 7035
8.86″x7.87″x3.94″
M6422134 Technomet R110H

M6422134

Technomet R110H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6422134

Technomet R110H Aluminum
Anthracite RAL 7016
8.86″x7.87″x3.94″
M6422135 Technomet R110H

M6422135

Technomet R110H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6422135

Technomet R110H Aluminum
Light gray RAL 7035
8.86″x7.87″x3.94″
M6423124 Technomet SL110

M6423124

Technomet SL110 Modern and highly attractive instrument enclosure with sloping front bezel for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB). The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With Sloping Front

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6423124

Technomet SL110 Aluminum
Anthracite RAL 7016
8.86″x9.06″x3.94″
M6423125 Technomet SL110

M6423125

Technomet SL110 Modern and highly attractive instrument enclosure with sloping front bezel for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490020 (order 2 guides per PCB). The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With Sloping Front

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6423125

Technomet SL110 Aluminum
Light gray RAL 7035
8.86″x9.06″x3.94″
M6427124 Technomet R210

M6427124

Technomet R210 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427124

Technomet R210 Aluminum
Anthracite RAL 7016
10.83″x9.84″x3.94″
M6427125 Technomet R210

M6427125

Technomet R210 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427125

Technomet R210 Aluminum
Light gray RAL 7035
10.83″x9.84″x3.94″
M6427134 Technomet R210H

M6427134

Technomet R210H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427134

Technomet R210H Aluminum
Anthracite RAL 7016
10.83″x9.84″x3.94″
M6427135 Technomet R210H

M6427135

Technomet R210H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 5 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427135

Technomet R210H Aluminum
Light gray RAL 7035
10.83″x9.84″x3.94″
M6427224 Technomet R212

M6427224

Technomet R212 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427224

Technomet R212 Aluminum
Anthracite RAL 7016
10.83″x9.84″x4.92″
M6427225 Technomet R212

M6427225

Technomet R212 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427225

Technomet R212 Aluminum
Light gray RAL 7035
10.83″x9.84″x4.92″
M6427234 Technomet R212H

M6427234

Technomet R212H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427234

Technomet R212H Aluminum
Anthracite RAL 7016
10.83″x9.84″x4.92″
M6427235 Technomet R212H

M6427235

Technomet R212H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427235

Technomet R212H Aluminum
Light gray RAL 7035
10.83″x9.84″x4.92″
M6427334 Technomet R215H

M6427334

Technomet R215H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427334

Technomet R215H Aluminum
Anthracite RAL 7016
10.83″x9.84″x5.91″
M6427335 Technomet R215H

M6427335

Technomet R215H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427335

Technomet R215H Aluminum
Light gray RAL 7035
10.83″x9.84″x5.91″
M6427354 Technomet R215S

M6427354

Technomet R215S Modern and highly attractive instrument enclosure for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel, two ABS side handles and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With side handles

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS side handle (x2), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427354

Technomet R215S Aluminum
Anthracite RAL 7016
10.83″x9.84″x5.91″
M6427355 Technomet R215S

M6427355

Technomet R215S Modern and highly attractive instrument enclosure for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel, two ABS side handles and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With side handles

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS side handle (x2), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6427355

Technomet R215S Aluminum
Light gray RAL 7035
10.83″x9.84″x5.91″
M6428224 Technomet SL212

M6428224

Technomet SL212 Modern and highly attractive instrument enclosure with sloping front bezel for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB). The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With Sloping Front

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6428224

Technomet SL212 Aluminum
Anthracite RAL 7016
10.83″x11.22″x4.92″
M6428225 Technomet SL212

M6428225

Technomet SL212 Modern and highly attractive instrument enclosure with sloping front bezel for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB). The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With Sloping Front

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6428225

Technomet SL212 Aluminum
Light gray RAL 7035
10.83″x11.22″x4.92″
M6435124 Technomet R310

M6435124

Technomet R310 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 4 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435124

Technomet R310 Aluminum
Anthracite RAL 7016
13.78″x10.83″x3.94″
M6435125 Technomet R310

M6435125

Technomet R310 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 4 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435125

Technomet R310 Aluminum
Light gray RAL 7035
13.78″x10.83″x3.94″
M6435134 Technomet R310H

M6435134

Technomet R310H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 4 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435134

Technomet R310H Aluminum
Anthracite RAL 7016
13.78″x10.83″x3.94″
M6435135 Technomet R310H

M6435135

Technomet R310H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 4 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435135

Technomet R310H Aluminum
Light gray RAL 7035
13.78″x10.83″x3.94″
M6435224 Technomet R312

M6435224

Technomet R312 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435224

Technomet R312 Aluminum
Anthracite RAL 7016
13.78″x10.83″x4.92″
M6435225 Technomet R312

M6435225

Technomet R312 Modern and highly attractive instrument enclosure for desktop electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version Without handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435225

Technomet R312 Aluminum
Light gray RAL 7035
13.78″x10.83″x4.92″
M6435234 Technomet R312H

M6435234

Technomet R312H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435234

Technomet R312H Aluminum
Anthracite RAL 7016
13.78″x10.83″x4.92″
M6435235 Technomet R312H

M6435235

Technomet R312H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 7 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435235

Technomet R312H Aluminum
Light gray RAL 7035
13.78″x10.83″x4.92″
M6435334 Technomet R315H

M6435334

Technomet R315H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435334

Technomet R315H Aluminum
Anthracite RAL 7016
13.78″x10.83″x5.91″
M6435335 Technomet R315H

M6435335

Technomet R315H Modern and highly attractive instrument enclosure with handle/bail arm for desktop and portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The handle can be indexed at 30° increments. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted to the base panel. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With handle/bail arm

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), carry handle/bail arm kit, ABS feet (x4), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435335

Technomet R315H Aluminum
Light gray RAL 7035
13.78″x10.83″x5.91″
M6435354 Technomet R315S

M6435354

Technomet R315S Modern and highly attractive instrument enclosure for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel, two ABS side handles and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With side handles

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS side handle (x2), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435354

Technomet R315S Aluminum
Anthracite RAL 7016
13.78″x10.83″x5.91″
M6435355 Technomet R315S

M6435355

Technomet R315S Modern and highly attractive instrument enclosure for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB).

The case is supplied with a rear panel, two ABS side handles and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With side handles

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS side handle (x2), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6435355

Technomet R315S Aluminum
Light gray RAL 7035
13.78″x10.83″x5.91″
M6436324 Technomet SL315S

M6436324

Technomet SL315S Modern and highly attractive instrument enclosure with sloping front bezel for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB). The case is supplied with a rear panel, two ABS side handles and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With Sloping Front

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS side handle (x2), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6436324

Technomet SL315S Aluminum
Anthracite RAL 7016
13.78″x12.60″x5.91″
M6436325 Technomet SL315S

M6436325

Technomet SL315S Modern and highly attractive instrument enclosure with sloping front bezel for desktop or portable electronics. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws and front panel screws, giving a very professional appearance. The pre-assembled internal chassis is supplied with four M3 PCB mounting pillars fitted in the base. The internal chassis can also be fitted with 9 slide-in PCBs using the accessory snap-in guide M6490010 (order 4 guides per PCB). The case is supplied with a rear panel, two ABS side handles and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.

Version With Sloping Front

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS side handle (x2), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.

Close

M6436325

Technomet SL315S Aluminum
Light gray RAL 7035
13.78″x12.60″x5.91″
  • Technical Data
  • Drawings / Info
  • Purchasing Data
Material
Color
Zinc coated
Standards
REACH compliant
RoHS compliant
Length
0.236″
6 mm

Catalog Pages

Weight/1 part
0.07 kg
Customs tariff number
(METCASE product)
74153300
Country of manufacture
U.K.