Application fields
Rack mounted electronics such as networking and communications equipment, industrial computers, sound and studio systems, laboratory instruments and industrial control systems.
M6119235
COMBIMET T 19" 2Ux14.37" Open Top
Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Open Top
Supply
19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.
Close
COMBIMET T 19" 2Ux14.37" Open Top
product added to your basket
Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6119239
COMBIMET T 19" 2Ux14.37" Open Top
Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Open Top
Supply
19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.
Close
COMBIMET T 19" 2Ux14.37" Open Top
product added to your basket
Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6119335
COMBIMET T 19" 3Ux14.37" Open Top
Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Open Top
Supply
19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.
Close
COMBIMET T 19" 3Ux14.37" Open Top
product added to your basket
Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6119339
COMBIMET T 19" 3Ux14.37" Open Top
Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Open Top
Supply
19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.
Close
COMBIMET T 19" 3Ux14.37" Open Top
product added to your basket
Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219115
COMBIMET 19" 1Ux10.43" Solid Top
Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Unventilated, solid top cover
Supply
19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux10.43" Solid Top
product added to your basket
Aluminum
Light gray RAL 7035
1.72″x19.00″x10.43″
M6219119
COMBIMET 19" 1Ux10.43" Solid Top
Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Unventilated, solid top cover
Supply
19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux10.43" Solid Top
product added to your basket
Aluminum
Black RAL 9005
1.72″x19.00″x10.43″
M6219125
COMBIMET 19" 1Ux14.37" Solid Top
Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Unventilated, solid top cover
Supply
19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux14.37" Solid Top
product added to your basket
Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219129
COMBIMET 19" 1Ux14.37" Solid Top
Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Unventilated, solid top cover
Supply
19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux14.37" Solid Top
product added to your basket
Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219135
COMBIMET 19" 1Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux10.43"
product added to your basket
Aluminum
Light gray RAL 7035
1.72″x19.00″x10.43″
M6219139
COMBIMET 19" 1Ux10.43"
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux10.43"
product added to your basket
Aluminum
Black RAL 9005
1.72″x19.00″x10.43″
M6219145
COMBIMET 19" 1Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, ventilated top panel, ventilated base panel, 2 side panels, 2 handle extrusions, fixing screws. Supplied fully assembled.
Close
COMBIMET 19" 1Ux10.43" Vented
product added to your basket
Aluminum
Light gray RAL 7035
1.72″x19.00″x10.43″
M6219149
COMBIMET 19" 1Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux10.43" Vented
product added to your basket
Aluminum
Black RAL 9005
1.72″x19.00″x10.43″
M6219155
COMBIMET 19" 1Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux14.37"
product added to your basket
Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219159
COMBIMET 19" 1Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux14.37"
product added to your basket
Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219165
COMBIMET 19" 1Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux14.37" Vented
product added to your basket
Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219169
COMBIMET 19" 1Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux14.37" Vented
product added to your basket
Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219179
COMBIMET 19" 1Ux24"
Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux24"
product added to your basket
Aluminum
Black RAL 9005
1.72″x19.00″x24.00″
M6219189
COMBIMET 19" 1Ux24" Vented
Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux24" Vented
product added to your basket
Aluminum
Black RAL 9005
1.72″x19.00″x24.00″
M6219235
COMBIMET 19" 2Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux10.43"
product added to your basket
Aluminum
Light gray RAL 7035
3.47″x19.00″x10.43″
M6219239
COMBIMET 19" 2Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux10.43"
product added to your basket
Aluminum
Black RAL 9005
3.47″x19.00″x10.43″
M6219245
COMBIMET 19" 2Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux10.43" Vented
product added to your basket
Aluminum
Light gray RAL 7035
3.47″x19.00″x10.43″
M6219249
COMBIMET 19" 2Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux10.43" Vented
product added to your basket
Aluminum
Black RAL 9005
3.47″x19.00″x10.43″
M6219255
COMBIMET 19" 2Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux14.37"
product added to your basket
Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6219259
COMBIMET 19" 2Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux14.37"
product added to your basket
Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6219265
COMBIMET 19" 2Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux14.37" Vented
product added to your basket
Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6219269
COMBIMET 19" 2Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux14.37" Vented
product added to your basket
Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6219279
COMBIMET 19" 2Ux24"
Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux24"
product added to your basket
Aluminum
Black RAL 9005
3.47″x19.00″x24.00″
M6219289
COMBIMET 19" 2Ux24" Vented
Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux24" Vented
product added to your basket
Aluminum
Black RAL 9005
3.47″x19.00″x24.00″
M6219335
COMBIMET 19" 3Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux10.43"
product added to your basket
Aluminum
Light gray RAL 7035
5.22″x19.00″x10.43″
M6219339
COMBIMET 19" 3Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux10.43"
product added to your basket
Aluminum
Black RAL 9005
5.22″x19.00″x10.43″
M6219345
COMBIMET 19" 3Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux10.43" Vented
product added to your basket
Aluminum
Light gray RAL 7035
5.22″x19.00″x10.43″
M6219349
COMBIMET 19" 3Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux10.43" Vented
product added to your basket
Aluminum
Black RAL 9005
5.22″x19.00″x10.43″
M6219355
COMBIMET 19" 3Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux14.37"
product added to your basket
Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6219359
COMBIMET 19" 3Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux14.37"
product added to your basket
Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219365
COMBIMET 19" 3Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux14.37" Vented
product added to your basket
Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6219369
COMBIMET 19" 3Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux14.37" Vented
product added to your basket
Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219379
COMBIMET 19" 3Ux24"
Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux24"
product added to your basket
Aluminum
Black RAL 9005
5.22″x19.00″x24.00″
M6219389
COMBIMET 19" 3Ux24" Vented
Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux24" Vented
product added to your basket
Aluminum
Black RAL 9005
5.22″x19.00″x24.00″
M6219435
COMBIMET 19" 4Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux10.43"
product added to your basket
Aluminum
Light gray RAL 7035
6.97″x19.00″x10.43″
M6219439
COMBIMET 19" 4Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux10.43"
product added to your basket
Aluminum
Black RAL 9005
6.97″x19.00″x10.43″
M6219445
COMBIMET 19" 4Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux10.43" Vented
product added to your basket
Aluminum
Light gray RAL 7035
6.97″x19.00″x10.43″
M6219449
COMBIMET 19" 4Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux10.43" Vented
product added to your basket
Aluminum
Black RAL 9005
6.97″x19.00″x10.43″
M6219455
COMBIMET 19" 4Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux14.37"
product added to your basket
Aluminum
Light gray RAL 7035
6.97″x19.00″x14.37″
M6219459
COMBIMET 19" 4Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux14.37"
product added to your basket
Aluminum
Black RAL 9005
6.97″x19.00″x14.37″
M6219465
COMBIMET 19" 4Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux14.37" Vented
product added to your basket
Aluminum
Light gray RAL 7035
6.97″x19.00″x14.37″
M6219469
COMBIMET 19" 4Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux14.37" Vented
product added to your basket
Aluminum
Black RAL 9005
6.97″x19.00″x14.37″
M6219479
COMBIMET 19" 4Ux24"
Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux24"
product added to your basket
Aluminum
Black RAL 9005
6.97″x19.00″x24.00″
M6219489
COMBIMET 19" 4Ux24" Vented
Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux24" Vented
product added to your basket
Aluminum
Black RAL 9005
6.97″x19.00″x24.00″
M6219535
COMBIMET 19" 5Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux10.43"
product added to your basket
Aluminum
Light gray RAL 7035
8.70″x19.00″x10.43″
M6219539
COMBIMET 19" 5Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux10.43"
product added to your basket
Aluminum
Black RAL 9005
8.70″x19.00″x10.43″
M6219545
COMBIMET 19" 5Ux10.43" Vented
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux10.43" Vented
product added to your basket
Aluminum
Light gray RAL 7035
8.70″x19.00″x10.43″
M6219549
COMBIMET 19" 5Ux10.43" Vented
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux10.43" Vented
product added to your basket
Aluminum
Black RAL 9005
8.70″x19.00″x10.43″
M6219555
COMBIMET 19" 5Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux14.37"
product added to your basket
Aluminum
Light gray RAL 7035
8.70″x19.00″x14.37″
M6219559
COMBIMET 19" 5Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux14.37"
product added to your basket
Aluminum
Black RAL 9005
8.70″x19.00″x14.37″
M6219565
COMBIMET 19" 5Ux14.37" Vented
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux14.37" Vented
product added to your basket
Aluminum
Light gray RAL 7035
8.70″x19.00″x14.37″
M6219569
COMBIMET 19" 5Ux14.37" Vented
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux14.37" Vented
product added to your basket
Aluminum
Black RAL 9005
8.70″x19.00″x14.37″
M6219579
COMBIMET 19" 5Ux24"
Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux24"
product added to your basket
Aluminum
Black RAL 9005
8.70″x19.00″x24.00″
M6219589
COMBIMET 19" 5Ux24" Vented
Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux24" Vented
product added to your basket
Aluminum
Black RAL 9005
8.70″x19.00″x24.00″
M6219635
COMBIMET 19" 6Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux10.43"
product added to your basket
Aluminum
Light gray RAL 7035
10.47″x19.00″x10.43″
M6219639
COMBIMET 19" 6Ux10.43"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux10.43"
product added to your basket
Aluminum
Black RAL 9005
10.47″x19.00″x10.43″
M6219645
COMBIMET 19" 6Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux10.43" Vented
product added to your basket
Aluminum
Light gray RAL 7035
10.47″x19.00″x10.43″
M6219649
COMBIMET 19" 6Ux10.43" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux10.43" Vented
product added to your basket
Aluminum
Black RAL 9005
10.47″x19.00″x10.43″
M6219655
COMBIMET 19" 6Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux14.37"
product added to your basket
Aluminum
Light gray RAL 7035
10.47″x19.00″x14.37″
M6219659
COMBIMET 19" 6Ux14.37"
Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux14.37"
product added to your basket
Aluminum
Black RAL 9005
10.47″x19.00″x14.37″
M6219665
COMBIMET 19" 6Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux14.37" Vented
product added to your basket
Aluminum
Light gray RAL 7035
10.47″x19.00″x14.37″
M6219669
COMBIMET 19" 6Ux14.37" Vented
Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux14.37" Vented
product added to your basket
Aluminum
Black RAL 9005
10.47″x19.00″x14.37″
M6219679
COMBIMET 19" 6Ux24"
Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x6), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 6Ux24"
product added to your basket
Aluminum
Black RAL 9005
10.47″x19.00″x24.00″
M6219689
COMBIMET 19" 6Ux24" Vented
Modern ventilated aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x6), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 6Ux24" Vented
product added to your basket
Aluminum
Black RAL 9005
10.47″x19.00″x24.00″
M5600001
PCB mounting kit
Kit of ten M3 plastic PCB mounting pillars which can be positioned anywhere in the enclosure. Pillar height 10 mm. Fits to Ø3.2 mm hole in the case panel. Supplied with M3 fixing screws to secure to base panel.
If PCB or mounting plate fixing screws are required please see our screw kit
M5600010.
Supply
10 Nylon PCB pillars and 10 M3 x 6 mm fixing screws.
Close
PCB mounting kit
product added to your basket
PA 6
Black RAL 9005
M5600010
PCB Fixing Screws, M3
Pack of 100 M3 x 6 mm pan head pozi drive screws. Used for fitting PCBs and mounting plates to the threaded standoffs in our standard enclosures: TECHNOMET, MINIMET
Also suitable for use in combination with M5600001 PCB Mounting Kit, to secure PCBs to the plastic mounting pillars. Fixing points are provided in the following enclosures for this kit: COMBIMET 19", VERSAMET 19", UNIMET 19", UNIDESK, UNIMET, UNIMET-PLUS, DATAMET
These screws can also be used to replace the standard slotted case assembly screws supplied with our UNICASE enclosures — if pozi drive screws are preferred.
Additionally, this screw pack may be useful if your enclosure has been customized with M3 threaded inserts and pillars.
Supply
100 M3 x 6 mm pan head fixing screws (pozi drive PZ1).
Close
PCB Fixing Screws, M3
product added to your basket
Steel
Zinc coated
0.24″
M5900016
19" mounting kit
Mounting kit including all hardware for fitting a 19" rack case, subrack or front panel into a 19" rack.
Supply
M6 caged nuts (x4), M6 x 16 mm screw (x4) and black plastic cup washer (x4).
Close
19" mounting kit
product added to your basket
Black RAL 9005
M5900018
19" mounting kit black screws
Mounting kit including all hardware for fitting a 19" rack case, subrack or front panel into a 19" rack. Black screws and black cup washers.
Supply
M6 caged nuts (x4), M6 x 16 mm black screw (x4) and black plastic cup washer (x4).
Close
19" mounting kit black screws
product added to your basket
Black RAL 9005
M6000035
19" mounting kit
Mounting kit including all hardware for fitting a 19" rack case, subrack or front panel into a 19" rack.
Supply
M6 caged nuts (x4), M6 x 16 mm screw (x4) and light gray plastic cup washer (x4).
Close
19" mounting kit
product added to your basket
Light gray RAL 7035
M6200265
Mounting plate (10.43")
Internal mounting plate kit for COMBIMET 19" rack cases 10.43" deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.
Supply
Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).
Close
Mounting plate (10.43")
product added to your basket
Aluminum
Natural finish
13.19″x9.06″x0.06″
M6200365
Mounting plate (14.37")
Internal mounting plate kit for COMBIMET 19" rack cases 14.37 inches deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.
Supply
Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).
Close
Mounting plate (14.37")
product added to your basket
Aluminum
Natural finish
13.19″x12.99″x0.06″
M6200610
Mounting plate (24")
Internal mounting plate kit for COMBIMET 19" rack cases 24" deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.
Supply
Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).
Close
Mounting plate (24")
product added to your basket
Aluminum
Natural finish
13.19″x22.62″x0.06″
19" Enclosures
Metal Enclosures Modern metal enclosures for OEM electronics equipment
Accessories for Enclosures Extensive range of universal accessories
Accessories for 19" Racks Universal accessories for 19" equipment
Modifications & Finishing All the customizing services you need
Bespoke Enclosures Bespoke metal enclosures and sheet metal parts
News
Blog
Specifying Customized Enclosures
ROHS / WEEE Directives
Discontinued Products
General Inquiries Form
How To Find Us
Worldwide Sales Network
