Search Your location/language , English
M5900016 19

M5900016

19" mounting kit

Mounting kit including all hardware for fitting a 19" rack case, subrack or front panel into a 19" rack.

Supply

M6 caged nuts (x4), M6 x 16 mm screw (x4) and black plastic cup washer (x4).

  • To be used for
M4919119 VERSAMET 19" 1Ux6.49"

M4919119

VERSAMET 19" 1Ux6.49" Modern and versatile 19" rack cases with anodized front panel and integrated 'comfort-handles'. Folded aluminum case body with all fixings hidden on the underside. Removable base and rear panel for easy access.

Supply 1U x 19" front panel, two handles, top cover, base panel, rear panel, M3 x 8 mm (x6), M3 x 8 mm (x4), M4 nut and washer (x4). Supplied assembled.

Close

M4919119

VERSAMET 19" 1Ux6.49" Aluminum
Black RAL 9005
1.73″x19.02″x6.50″
M4919129 VERSAMET 19" 1Ux10.43"

M4919129

VERSAMET 19" 1Ux10.43" Modern and versatile 19" rack cases with anodized front panel and integrated 'comfort-handles'. Folded aluminum case body with all fixings hidden on the underside. Removable base and rear panel for easy access.

Supply 1U x 19" front panel, two handles, top cover, base panel, rear panel, M3 x 8 mm (x6), M3 x 8 mm (x6), M4 nut and washer (x4). Supplied assembled.

Close

M4919129

VERSAMET 19" 1Ux10.43" Aluminum
Black RAL 9005
1.73″x19.02″x10.43″
M5619225 UNIMET 19" 2Ux11.02"

M5619225

UNIMET 19" 2Ux11.02" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619225

UNIMET 19" 2Ux11.02" Aluminum
Light gray/window gray RAL 7035/7040
3.46″x19.00″x11.02″
M5619235 UNIMET 19" 2Ux14.96"

M5619235

UNIMET 19" 2Ux14.96" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619235

UNIMET 19" 2Ux14.96" Aluminum
Light gray/window gray RAL 7035/7040
3.46″x19.00″x14.96″
M5619325 UNIMET 19" 3Ux11.02"

M5619325

UNIMET 19" 3Ux11.02" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619325

UNIMET 19" 3Ux11.02" Aluminum
Light gray/window gray RAL 7035/7040
5.22″x19.00″x11.02″
M5619335 UNIMET 19" 3Ux14.96"

M5619335

UNIMET 19" 3Ux14.96" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619335

UNIMET 19" 3Ux14.96" Aluminum
Light gray/window gray RAL 7035/7040
5.22″x19.00″x14.96″
M5910015 METTEC 19" 1Ux6.59"

M5910015

METTEC 19" 1Ux6.59" Modern and robust 19" rack case with integrated 'comfort handles'. All aluminium design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x4), M3 x 8 mm (x4). Suppled assembled.

Close

M5910015

METTEC 19" 1Ux6.59" Aluminum
Light gray RAL 7035
1.73″x19.00″x6.59″
M5910025 METTEC 19" 1Ux10.35"

M5910025

METTEC 19" 1Ux10.35" Modern and robust 19" rack case with integrated 'comfort handles'. All aluminium design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x4), M3 x 8 mm (x4). Suppled assembled.

Close

M5910025

METTEC 19" 1Ux10.35" Aluminum
Light gray RAL 7035
1.73″x19.00″x10.53″
M5910035 METTEC 19" 1Ux14.46"

M5910035

METTEC 19" 1Ux14.46" Modern and robust 19" rack case with integrated 'comfort handles'. All aluminium design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x4), M3 x 8 mm (x4). Suppled assembled.

Close

M5910035

METTEC 19" 1Ux14.46" Aluminum
Light gray RAL 7035
1.73″x19.00″x14.47″
M5920015 METTEC 19" 2Ux6.59"

M5920015

METTEC 19" 2Ux6.59" Modern and robust 19" rack case with integrated 'comfort handles'. All aluminum design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x8), M3 x 8 mm (x4). Suppled assembled.

Close

M5920015

METTEC 19" 2Ux6.59" Aluminum
Light gray RAL 7035
3.46″x19.00″x6.59″
M5920025 METTEC 19" 2Ux10.35"

M5920025

METTEC 19" 2Ux10.35" Modern and robust 19" rack case with integrated 'comfort handles'. All aluminum design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x8), M3 x 8 mm (x4). Suppled assembled.

Close

M5920025

METTEC 19" 2Ux10.35" Aluminum
Light gray RAL 7035
3.46″x19.00″x10.53″
M5920035 METTEC 19" 2Ux14.46"

M5920035

METTEC 19" 2Ux14.46" Modern and robust 19" rack case with integrated 'comfort handles'. All aluminum design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x8), M3 x 8 mm (x4). Suppled assembled.

Close

M5920035

METTEC 19" 2Ux14.46" Aluminum
Interlox 338
3.46″x19.00″x14.47″
M5930015 METTEC 19" 3Ux6.59"

M5930015

METTEC 19" 3Ux6.59" Modern and robust 19" rack case with integrated 'comfort handles'. All aluminum design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x8), M3 x 8 mm (x4). Suppled assembled.

Close

M5930015

METTEC 19" 3Ux6.59" Aluminum
Interlox 338
5.22″x19.00″x6.59″
M5930025 METTEC 19" 3Ux10.35"

M5930025

METTEC 19" 3Ux10.35" Modern and robust 19" rack case with integrated 'comfort handles'. All aluminum design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x8), M3 x 8 mm (x4). Suppled assembled.

Close

M5930025

METTEC 19" 3Ux10.35" Aluminum
Interlox 338
5.22″x19.00″x10.53″
M5930035 METTEC 19" 3Ux14.46"

M5930035

METTEC 19" 3Ux14.46" Modern and robust 19" rack case with integrated 'comfort handles'. All aluminum design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x8), M3 x 8 mm (x4). Suppled assembled.

Close

M5930035

METTEC 19" 3Ux14.46" Aluminum
Interlox 338
5.22″x19.00″x14.47″
M6010305 INSTRUMET 10.5" 3Ux13.78"

M6010305

INSTRUMET 10.5" 3Ux13.78" Stylish 10.5" instrument case for mounting 3U subracks, chassis or front panels. Desktop version with ABS sides handles. Robust design with two die cast front bezels and fabricated case body. The base panel and rear panel are ventilated. Internal chassis runners support the equipment. Supplied with pre-fitted with ABS tilt feet.

Version With side handles

Supply Front bezel (x2), top cover, ventilated base and rear panel, chassis runner (x2), ABS side handles (x2), ABS feet (x2), ABS tilt legs (x2), M4 x 10 mm (x8), M4 x 12 mm (x4), M3 x 8 mm (x10). Supplied fully assembled.

Close

M6010305

INSTRUMET 10.5" 3Ux13.78" Aluminum
Light gray/window gray RAL 7035/7040
6.18″x11.93″x13.78″
M6010315 INSTRUMET 10.5" 3Ux13.78"

M6010315

INSTRUMET 10.5" 3Ux13.78" Stylish 10.5" instrument case for mounting 3U subracks, chassis or front panels. Portable version with metal handle/bail arm. Robust design with two die cast front bezels and fabricated case body. The base panel and rear panel are ventilated. Internal chassis runners support the equipment. Supplied with pre-fitted with ABS tilt feet.

Version With handle/bail arm

Supply Front bezel (x2), top cover, ventilated base and rear panel, chassis runner (x2), carry handle bar, ABS feet (x2), ABS tilt legs (x2), M4 x 10 mm (x8), M4 x 12 mm (x4), M3 x 8 mm (x10). Supplied fully assembled.

Close

M6010315

INSTRUMET 10.5" 3Ux13.78" Aluminum
Light gray/window gray RAL 7035/7040
6.18″x11.93″x13.78″
M6019305 INSTRUMET 19" 3Ux13.78"

M6019305

INSTRUMET 19" 3Ux13.78" Stylish 19" instrument case for mounting 3U subracks, chassis or front panels. Desktop version with ABS sides handles. Robust design with two die cast front bezels and fabricated case body. The base panel and rear panel are ventilated. Internal chassis runners support the equipment. Supplied with pre-fitted with ABS tilt feet.

Version With side handles

Supply Front bezel (x2), top cover, ventilated base and rear panel, chassis runner (x2), ABS side handles (x2), ABS feet (x2), ABS tilt legs (x2), M4 x 10 mm (x8), M4 x 12 mm (x4), M3 x 8 mm (x10). Supplied fully assembled.

Close

M6019305

INSTRUMET 19" 3Ux13.78" Aluminum
Light gray/window gray RAL 7035/7040
6.18″x20.31″x13.78″
M6019315 INSTRUMET 19" 3Ux13.78"

M6019315

INSTRUMET 19" 3Ux13.78" Stylish 19" instrument case for mounting 3U subracks, chassis or front panels. Portable version with metal handle/bail arm. Robust design with two die cast front bezels and fabricated case body. The base panel and rear panel are ventilated. Internal chassis runners support the equipment. Supplied with pre-fitted with ABS tilt feet.

Version With handle/bail arm

Supply Front bezel (x2), top cover, ventilated base and rear panel, chassis runner (x2), carry handle bar, ABS feet (x2), ABS tilt legs (x2), M4 x 10 mm (x8), M4 x 12 mm (x4), M3 x 8 mm (x10). Supplied fully assembled.

Close

M6019315

INSTRUMET 19" 3Ux13.78" Aluminum
Light gray/window gray RAL 7035/7040
6.18″x20.31″x13.78″
M6019325 INSTRUMET 19" 3Ux17.72"

M6019325

INSTRUMET 19" 3Ux17.72" Stylish 19" instrument case for mounting 3U subracks, chassis or front panels. Desktop version with ABS sides handles. Robust design with two die cast front bezels and fabricated case body. The base panel and rear panel are ventilated. Internal chassis runners support the equipment. Supplied with pre-fitted with ABS tilt feet.

Version With side handles

Supply Front bezel (x2), top cover, ventilated base and rear panel, chassis runner (x2), ABS side handles (x2), ABS feet (x2), ABS tilt legs (x2), M4 x 10 mm (x8), M4 x 12 mm (x4), M3 x 8 mm (x10). Supplied fully assembled.

Close

M6019325

INSTRUMET 19" 3Ux17.72" Aluminum
Light gray/window gray RAL 7035/7040
6.18″x20.31″x17.72″
M6019335 INSTRUMET 19" 3Ux17.72"

M6019335

INSTRUMET 19" 3Ux17.72" Stylish 19" instrument case for mounting 3U subracks, chassis or front panels. Portable version with metal handle/bail arm. Robust design with two die cast front bezels and fabricated case body. The base panel and rear panel are ventilated. Internal chassis runners support the equipment. Supplied with pre-fitted with ABS tilt feet.

Version With handle/bail arm

Supply Front bezel (x2), top cover, ventilated base and rear panel, chassis runner (x2), carry handle bar, ABS feet (x2), ABS tilt legs (x2), M4 x 10 mm (x8), M4 x 12 mm (x4), M3 x 8 mm (x10). Supplied fully assembled.

Close

M6019335

INSTRUMET 19" 3Ux17.72" Aluminum
Light gray/window gray RAL 7035/7040
6.18″x20.31″x17.72″
M6119235 COMBIMET T 19" 2Ux14.37"

M6119235

COMBIMET T 19" 2Ux14.37" Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Open Top

Supply 19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.

Close

M6119235

COMBIMET T 19" 2Ux14.37" Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6119239 COMBIMET T 19" 2Ux14.37"

M6119239

COMBIMET T 19" 2Ux14.37" Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Open Top

Supply 19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.

Close

M6119239

COMBIMET T 19" 2Ux14.37" Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6119335 COMBIMET T 19" 3Ux14.37"

M6119335

COMBIMET T 19" 3Ux14.37" Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Open Top

Supply 19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.

Close

M6119335

COMBIMET T 19" 3Ux14.37" Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6119339 COMBIMET T 19" 3Ux14.37"

M6119339

COMBIMET T 19" 3Ux14.37" Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Open Top

Supply 19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.

Close

M6119339

COMBIMET T 19" 3Ux14.37" Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219115 COMBIMET 19" 1Ux10.43"

M6219115

COMBIMET 19" 1Ux10.43" Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Unventilated, solid top cover

Supply 19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219115

COMBIMET 19" 1Ux10.43" Aluminum
Light gray RAL 7035
1.72″x19.00″x10.43″
M6219119 COMBIMET 19" 1Ux10.43"

M6219119

COMBIMET 19" 1Ux10.43" Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Unventilated, solid top cover

Supply 19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219119

COMBIMET 19" 1Ux10.43" Aluminum
Black RAL 9005
1.72″x19.00″x10.43″
M6219125 COMBIMET 19" 1Ux14.37"

M6219125

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Unventilated, solid top cover

Supply 19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219125

COMBIMET 19" 1Ux14.37" Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219129 COMBIMET 19" 1Ux14.37"

M6219129

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Unventilated, solid top cover

Supply 19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219129

COMBIMET 19" 1Ux14.37" Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219135 COMBIMET 19" 1Ux10.43"

M6219135

COMBIMET 19" 1Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219135

COMBIMET 19" 1Ux10.43" Aluminum
Light gray RAL 7035
1.72″x19.00″x10.43″
M6219139 COMBIMET 19" 1Ux10.43"

M6219139

COMBIMET 19" 1Ux10.43" Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219139

COMBIMET 19" 1Ux10.43" Aluminum
Black RAL 9005
1.72″x19.00″x10.43″
M6219145 COMBIMET 19" 1Ux10.43"

M6219145

COMBIMET 19" 1Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, ventilated top panel, ventilated base panel, 2 side panels, 2 handle extrusions, fixing screws. Supplied fully assembled.

Close

M6219145

COMBIMET 19" 1Ux10.43" Aluminum
Light gray RAL 7035
1.72″x19.00″x10.43″
M6219149 COMBIMET 19" 1Ux10.43"

M6219149

COMBIMET 19" 1Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219149

COMBIMET 19" 1Ux10.43" Aluminum
Black RAL 9005
1.72″x19.00″x10.43″
M6219155 COMBIMET 19" 1Ux14.37"

M6219155

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219155

COMBIMET 19" 1Ux14.37" Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219159 COMBIMET 19" 1Ux14.37"

M6219159

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219159

COMBIMET 19" 1Ux14.37" Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219165 COMBIMET 19" 1Ux14.37"

M6219165

COMBIMET 19" 1Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219165

COMBIMET 19" 1Ux14.37" Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219169 COMBIMET 19" 1Ux14.37"

M6219169

COMBIMET 19" 1Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219169

COMBIMET 19" 1Ux14.37" Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219179 COMBIMET 19" 1Ux24"

M6219179

COMBIMET 19" 1Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219179

COMBIMET 19" 1Ux24" Aluminum
Black RAL 9005
1.72″x19.00″x24.00″
M6219189 COMBIMET 19" 1Ux24"

M6219189

COMBIMET 19" 1Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219189

COMBIMET 19" 1Ux24" Aluminum
Black RAL 9005
1.72″x19.00″x24.00″
M6219235 COMBIMET 19" 2Ux10.43"

M6219235

COMBIMET 19" 2Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219235

COMBIMET 19" 2Ux10.43" Aluminum
Light gray RAL 7035
3.47″x19.00″x10.43″
M6219239 COMBIMET 19" 2Ux10.43"

M6219239

COMBIMET 19" 2Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219239

COMBIMET 19" 2Ux10.43" Aluminum
Black RAL 9005
3.47″x19.00″x10.43″
M6219245 COMBIMET 19" 2Ux10.43"

M6219245

COMBIMET 19" 2Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219245

COMBIMET 19" 2Ux10.43" Aluminum
Light gray RAL 7035
3.47″x19.00″x10.43″
M6219249 COMBIMET 19" 2Ux10.43"

M6219249

COMBIMET 19" 2Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219249

COMBIMET 19" 2Ux10.43" Aluminum
Black RAL 9005
3.47″x19.00″x10.43″
M6219255 COMBIMET 19" 2Ux14.37"

M6219255

COMBIMET 19" 2Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219255

COMBIMET 19" 2Ux14.37" Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6219259 COMBIMET 19" 2Ux14.37"

M6219259

COMBIMET 19" 2Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219259

COMBIMET 19" 2Ux14.37" Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6219265 COMBIMET 19" 2Ux14.37"

M6219265

COMBIMET 19" 2Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219265

COMBIMET 19" 2Ux14.37" Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6219269 COMBIMET 19" 2Ux14.37"

M6219269

COMBIMET 19" 2Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219269

COMBIMET 19" 2Ux14.37" Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6219279 COMBIMET 19" 2Ux24"

M6219279

COMBIMET 19" 2Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219279

COMBIMET 19" 2Ux24" Aluminum
Black RAL 9005
3.47″x19.00″x24.00″
M6219289 COMBIMET 19" 2Ux24"

M6219289

COMBIMET 19" 2Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219289

COMBIMET 19" 2Ux24" Aluminum
Black RAL 9005
3.47″x19.00″x24.00″
M6219335 COMBIMET 19" 3Ux10.43"

M6219335

COMBIMET 19" 3Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219335

COMBIMET 19" 3Ux10.43" Aluminum
Light gray RAL 7035
5.22″x19.00″x10.43″
M6219339 COMBIMET 19" 3Ux10.43"

M6219339

COMBIMET 19" 3Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219339

COMBIMET 19" 3Ux10.43" Aluminum
Black RAL 9005
5.22″x19.00″x10.43″
M6219345 COMBIMET 19" 3Ux10.43"

M6219345

COMBIMET 19" 3Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219345

COMBIMET 19" 3Ux10.43" Aluminum
Light gray RAL 7035
5.22″x19.00″x10.43″
M6219349 COMBIMET 19" 3Ux10.43"

M6219349

COMBIMET 19" 3Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219349

COMBIMET 19" 3Ux10.43" Aluminum
Black RAL 9005
5.22″x19.00″x10.43″
M6219355 COMBIMET 19" 3Ux14.37"

M6219355

COMBIMET 19" 3Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219355

COMBIMET 19" 3Ux14.37" Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6219359 COMBIMET 19" 3Ux14.37"

M6219359

COMBIMET 19" 3Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219359

COMBIMET 19" 3Ux14.37" Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219365 COMBIMET 19" 3Ux14.37"

M6219365

COMBIMET 19" 3Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219365

COMBIMET 19" 3Ux14.37" Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6219369 COMBIMET 19" 3Ux14.37"

M6219369

COMBIMET 19" 3Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219369

COMBIMET 19" 3Ux14.37" Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219379 COMBIMET 19" 3Ux24"

M6219379

COMBIMET 19" 3Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219379

COMBIMET 19" 3Ux24" Aluminum
Black RAL 9005
5.22″x19.00″x24.00″
M6219389 COMBIMET 19" 3Ux24"

M6219389

COMBIMET 19" 3Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219389

COMBIMET 19" 3Ux24" Aluminum
Black RAL 9005
5.22″x19.00″x24.00″
M6219435 COMBIMET 19" 4Ux10.43"

M6219435

COMBIMET 19" 4Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219435

COMBIMET 19" 4Ux10.43" Aluminum
Light gray RAL 7035
6.97″x19.00″x10.43″
M6219439 COMBIMET 19" 4Ux10.43"

M6219439

COMBIMET 19" 4Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219439

COMBIMET 19" 4Ux10.43" Aluminum
Black RAL 9005
6.97″x19.00″x10.43″
M6219445 COMBIMET 19" 4Ux10.43"

M6219445

COMBIMET 19" 4Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219445

COMBIMET 19" 4Ux10.43" Aluminum
Light gray RAL 7035
6.97″x19.00″x10.43″
M6219449 COMBIMET 19" 4Ux10.43"

M6219449

COMBIMET 19" 4Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219449

COMBIMET 19" 4Ux10.43" Aluminum
Black RAL 9005
6.97″x19.00″x10.43″
M6219455 COMBIMET 19" 4Ux14.37"

M6219455

COMBIMET 19" 4Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219455

COMBIMET 19" 4Ux14.37" Aluminum
Light gray RAL 7035
6.97″x19.00″x14.37″
M6219459 COMBIMET 19" 4Ux14.37"

M6219459

COMBIMET 19" 4Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219459

COMBIMET 19" 4Ux14.37" Aluminum
Black RAL 9005
6.97″x19.00″x14.37″
M6219465 COMBIMET 19" 4Ux14.37"

M6219465

COMBIMET 19" 4Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219465

COMBIMET 19" 4Ux14.37" Aluminum
Light gray RAL 7035
6.97″x19.00″x14.37″
M6219469 COMBIMET 19" 4Ux14.37"

M6219469

COMBIMET 19" 4Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219469

COMBIMET 19" 4Ux14.37" Aluminum
Black RAL 9005
6.97″x19.00″x14.37″
M6219479 COMBIMET 19" 4Ux24"

M6219479

COMBIMET 19" 4Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219479

COMBIMET 19" 4Ux24" Aluminum
Black RAL 9005
6.97″x19.00″x24.00″
M6219489 COMBIMET 19" 4Ux24"

M6219489

COMBIMET 19" 4Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219489

COMBIMET 19" 4Ux24" Aluminum
Black RAL 9005
6.97″x19.00″x24.00″
M6219535 COMBIMET 19" 5Ux10.43"

M6219535

COMBIMET 19" 5Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219535

COMBIMET 19" 5Ux10.43" Aluminum
Light gray RAL 7035
8.70″x19.00″x10.43″
M6219539 COMBIMET 19" 5Ux10.43"

M6219539

COMBIMET 19" 5Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219539

COMBIMET 19" 5Ux10.43" Aluminum
Black RAL 9005
8.70″x19.00″x10.43″
M6219545 COMBIMET 19" 5Ux10.43"

M6219545

COMBIMET 19" 5Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219545

COMBIMET 19" 5Ux10.43" Aluminum
Light gray RAL 7035
8.70″x19.00″x10.43″
M6219549 COMBIMET 19" 5Ux10.43"

M6219549

COMBIMET 19" 5Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219549

COMBIMET 19" 5Ux10.43" Aluminum
Black RAL 9005
8.70″x19.00″x10.43″
M6219555 COMBIMET 19" 5Ux14.37"

M6219555

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219555

COMBIMET 19" 5Ux14.37" Aluminum
Light gray RAL 7035
8.70″x19.00″x14.37″
M6219559 COMBIMET 19" 5Ux14.37"

M6219559

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219559

COMBIMET 19" 5Ux14.37" Aluminum
Black RAL 9005
8.70″x19.00″x14.37″
M6219565 COMBIMET 19" 5Ux14.37"

M6219565

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219565

COMBIMET 19" 5Ux14.37" Aluminum
Light gray RAL 7035
8.70″x19.00″x14.37″
M6219569 COMBIMET 19" 5Ux14.37"

M6219569

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219569

COMBIMET 19" 5Ux14.37" Aluminum
Black RAL 9005
8.70″x19.00″x14.37″
M6219579 COMBIMET 19" 5Ux24"

M6219579

COMBIMET 19" 5Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219579

COMBIMET 19" 5Ux24" Aluminum
Black RAL 9005
8.70″x19.00″x24.00″
M6219589 COMBIMET 19" 5Ux24"

M6219589

COMBIMET 19" 5Ux24" Modern ventilated aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219589

COMBIMET 19" 5Ux24" Aluminum
Black RAL 9005
8.70″x19.00″x24.00″
M6219635 COMBIMET 19" 6Ux10.43"

M6219635

COMBIMET 19" 6Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219635

COMBIMET 19" 6Ux10.43" Aluminum
Light gray RAL 7035
10.47″x19.00″x10.43″
M6219639 COMBIMET 19" 6Ux10.43"

M6219639

COMBIMET 19" 6Ux10.43" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219639

COMBIMET 19" 6Ux10.43" Aluminum
Black RAL 9005
10.47″x19.00″x10.43″
M6219645 COMBIMET 19" 6Ux10.43"

M6219645

COMBIMET 19" 6Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219645

COMBIMET 19" 6Ux10.43" Aluminum
Light gray RAL 7035
10.47″x19.00″x10.43″
M6219649 COMBIMET 19" 6Ux10.43"

M6219649

COMBIMET 19" 6Ux10.43" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219649

COMBIMET 19" 6Ux10.43" Aluminum
Black RAL 9005
10.47″x19.00″x10.43″
M6219655 COMBIMET 19" 6Ux14.37"

M6219655

COMBIMET 19" 6Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219655

COMBIMET 19" 6Ux14.37" Aluminum
Light gray RAL 7035
10.47″x19.00″x14.37″
M6219659 COMBIMET 19" 6Ux14.37"

M6219659

COMBIMET 19" 6Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219659

COMBIMET 19" 6Ux14.37" Aluminum
Black RAL 9005
10.47″x19.00″x14.37″
M6219665 COMBIMET 19" 6Ux14.37"

M6219665

COMBIMET 19" 6Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219665

COMBIMET 19" 6Ux14.37" Aluminum
Light gray RAL 7035
10.47″x19.00″x14.37″
M6219669 COMBIMET 19" 6Ux14.37"

M6219669

COMBIMET 19" 6Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219669

COMBIMET 19" 6Ux14.37" Aluminum
Black RAL 9005
10.47″x19.00″x14.37″
M6219679 COMBIMET 19" 6Ux24"

M6219679

COMBIMET 19" 6Ux24" Modern aluminum 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x6), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219679

COMBIMET 19" 6Ux24" Aluminum
Black RAL 9005
10.47″x19.00″x24.00″
M6219689 COMBIMET 19" 6Ux24"

M6219689

COMBIMET 19" 6Ux24" Modern ventilated aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x6), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219689

COMBIMET 19" 6Ux24" Aluminum
Black RAL 9005
10.47″x19.00″x24.00″
M6619344 TECHNOMET 19" 3Ux15.74"

M6619344

TECHNOMET 19" 3Ux15.74" Modern and highly attractive 19" instrument enclosure for mounting 3U subracks, chassis or front panels. Conforms to DIN 41494 & IEC 297-1. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws giving a very professional appearance. All case panels fitted with M4 threaded pillars for earth connection.

The case is supplied with a rear panel, two ABS side handles and four ABS non-slip feet. Ventilation slots are provided in the base and rear panel. Internal chassis runners support the 19" equipment.

Version With side handles

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS side handle (x2), ABS feet (x4), non-slip feet inserts (x4), M3 x 6 mm (x2), M3 x 8 mm (x12), M4 x 16 mm (x8), M4 x 12 mm (x6), M6 caged nuts (x4), M6 x 16 mm (x4) and black plastic cup washer (x4). Supplied assembled.

Close

M6619344

TECHNOMET 19" 3Ux15.74" Aluminum
Anthracite RAL 7016
6.13″x21.26″x15.75″
M6619444 TECHNOMET 19'' 4Ux15.74"

M6619444

TECHNOMET 19'' 4Ux15.74" Modern and highly attractive 19" instrument enclosure for mounting 4U subracks, chassis or front panels. Conforms to DIN 41494 & IEC 297-1. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws giving a very professional appearance. All case panels fitted with M4 threaded pillars for earth connection.

The case is supplied with a rear panel, two ABS side handles and four ABS non-slip feet. Ventilation slots are provided in the base and rear panel. Internal chassis runners support the 19" equipment.

Version With side handles

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS side handle (x2), ABS feet (x4), non-slip feet inserts (x4), M3 x 6 mm (x2), M3 x 8 mm (x12), M4 x 16 mm (x8), M4 x 12 mm (x6), M6 caged nuts (x4), M6 x 16 mm (x4) and black plastic cup washer (x4). Supplied assembled.

Close

M6619444

TECHNOMET 19'' 4Ux15.74" Aluminum
Anthracite RAL 7016
7.87″x21.26″x15.75″
M6619644 TECHNOMET 19'' 6Ux15.74"

M6619644

TECHNOMET 19'' 6Ux15.74" Modern and highly attractive 19" instrument enclosure for mounting 6U subracks, chassis or front panels. Conforms to DIN 41494 & IEC 297-1. Stylish front and rear bezels are fitted to the aluminum case body. Clip-on trims at the front and rear hide the assembly screws giving a very professional appearance. All case panels fitted with M4 threaded pillars for earth connection.

The case is supplied with a rear panel, two ABS side handles and four ABS non-slip feet. Ventilation slots are provided in the base and rear panel. Internal chassis runners support the 19" equipment.

Version With side handles

Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS side handle (x2), ABS feet (x4), non-slip feet inserts (x4), M3 x 6 mm (x2), M3 x 8 mm (x16), M4 x 16 mm (x8), M4 x 12 mm (x6), M6 caged nuts (x4), M6 x 16 mm (x4) and black plastic cup washer (x4). Supplied assembled.

Close

M6619644

TECHNOMET 19'' 6Ux15.74" Aluminum
Anthracite RAL 7016
11.37″x21.26″x15.75″
  • Technical Data
  • Drawings / Info
  • Purchasing Data
Color
Black RAL 9005
Standards
REACH compliant
RoHS compliant

Catalog Pages

Weight/1 part
0.04 kg
Customs tariff number
(METCASE product)
73181558
Country of manufacture
U.K.