Search Your location/language , English
M6200365 Mounting plate (14.37

M6200365

Mounting plate (14.37")

Internal mounting plate kit for COMBIMET 19" rack cases 14.37 inches deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.

Supply

Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).

  • To be used for
M6119235 COMBIMET T 19" 2Ux14.37"

M6119235

COMBIMET T 19" 2Ux14.37" Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Open Top

Supply 19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.

Close

M6119235

COMBIMET T 19" 2Ux14.37" Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6119239 COMBIMET T 19" 2Ux14.37"

M6119239

COMBIMET T 19" 2Ux14.37" Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Open Top

Supply 19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.

Close

M6119239

COMBIMET T 19" 2Ux14.37" Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6119335 COMBIMET T 19" 3Ux14.37"

M6119335

COMBIMET T 19" 3Ux14.37" Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Open Top

Supply 19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.

Close

M6119335

COMBIMET T 19" 3Ux14.37" Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6119339 COMBIMET T 19" 3Ux14.37"

M6119339

COMBIMET T 19" 3Ux14.37" Modern open top 19" rack case in aluminum with an anodized front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Open Top

Supply 19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.

Close

M6119339

COMBIMET T 19" 3Ux14.37" Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219155 COMBIMET 19" 1Ux14.37"

M6219155

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219155

COMBIMET 19" 1Ux14.37" Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219159 COMBIMET 19" 1Ux14.37"

M6219159

COMBIMET 19" 1Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219159

COMBIMET 19" 1Ux14.37" Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219165 COMBIMET 19" 1Ux14.37"

M6219165

COMBIMET 19" 1Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219165

COMBIMET 19" 1Ux14.37" Aluminum
Light gray RAL 7035
1.72″x19.00″x14.37″
M6219169 COMBIMET 19" 1Ux14.37"

M6219169

COMBIMET 19" 1Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219169

COMBIMET 19" 1Ux14.37" Aluminum
Black RAL 9005
1.72″x19.00″x14.37″
M6219255 COMBIMET 19" 2Ux14.37"

M6219255

COMBIMET 19" 2Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219255

COMBIMET 19" 2Ux14.37" Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6219259 COMBIMET 19" 2Ux14.37"

M6219259

COMBIMET 19" 2Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219259

COMBIMET 19" 2Ux14.37" Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6219265 COMBIMET 19" 2Ux14.37"

M6219265

COMBIMET 19" 2Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219265

COMBIMET 19" 2Ux14.37" Aluminum
Light gray RAL 7035
3.47″x19.00″x14.37″
M6219269 COMBIMET 19" 2Ux14.37"

M6219269

COMBIMET 19" 2Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219269

COMBIMET 19" 2Ux14.37" Aluminum
Black RAL 9005
3.47″x19.00″x14.37″
M6219355 COMBIMET 19" 3Ux14.37"

M6219355

COMBIMET 19" 3Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219355

COMBIMET 19" 3Ux14.37" Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6219359 COMBIMET 19" 3Ux14.37"

M6219359

COMBIMET 19" 3Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219359

COMBIMET 19" 3Ux14.37" Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219365 COMBIMET 19" 3Ux14.37"

M6219365

COMBIMET 19" 3Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219365

COMBIMET 19" 3Ux14.37" Aluminum
Light gray RAL 7035
5.22″x19.00″x14.37″
M6219369 COMBIMET 19" 3Ux14.37"

M6219369

COMBIMET 19" 3Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219369

COMBIMET 19" 3Ux14.37" Aluminum
Black RAL 9005
5.22″x19.00″x14.37″
M6219455 COMBIMET 19" 4Ux14.37"

M6219455

COMBIMET 19" 4Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219455

COMBIMET 19" 4Ux14.37" Aluminum
Light gray RAL 7035
6.97″x19.00″x14.37″
M6219459 COMBIMET 19" 4Ux14.37"

M6219459

COMBIMET 19" 4Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219459

COMBIMET 19" 4Ux14.37" Aluminum
Black RAL 9005
6.97″x19.00″x14.37″
M6219465 COMBIMET 19" 4Ux14.37"

M6219465

COMBIMET 19" 4Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219465

COMBIMET 19" 4Ux14.37" Aluminum
Light gray RAL 7035
6.97″x19.00″x14.37″
M6219469 COMBIMET 19" 4Ux14.37"

M6219469

COMBIMET 19" 4Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219469

COMBIMET 19" 4Ux14.37" Aluminum
Black RAL 9005
6.97″x19.00″x14.37″
M6219555 COMBIMET 19" 5Ux14.37"

M6219555

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219555

COMBIMET 19" 5Ux14.37" Aluminum
Light gray RAL 7035
8.70″x19.00″x14.37″
M6219559 COMBIMET 19" 5Ux14.37"

M6219559

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219559

COMBIMET 19" 5Ux14.37" Aluminum
Black RAL 9005
8.70″x19.00″x14.37″
M6219565 COMBIMET 19" 5Ux14.37"

M6219565

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219565

COMBIMET 19" 5Ux14.37" Aluminum
Light gray RAL 7035
8.70″x19.00″x14.37″
M6219569 COMBIMET 19" 5Ux14.37"

M6219569

COMBIMET 19" 5Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.

Close

M6219569

COMBIMET 19" 5Ux14.37" Aluminum
Black RAL 9005
8.70″x19.00″x14.37″
M6219655 COMBIMET 19" 6Ux14.37"

M6219655

COMBIMET 19" 6Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219655

COMBIMET 19" 6Ux14.37" Aluminum
Light gray RAL 7035
10.47″x19.00″x14.37″
M6219659 COMBIMET 19" 6Ux14.37"

M6219659

COMBIMET 19" 6Ux14.37" Modern aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version Without ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219659

COMBIMET 19" 6Ux14.37" Aluminum
Black RAL 9005
10.47″x19.00″x14.37″
M6219665 COMBIMET 19" 6Ux14.37"

M6219665

COMBIMET 19" 6Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219665

COMBIMET 19" 6Ux14.37" Aluminum
Light gray RAL 7035
10.47″x19.00″x14.37″
M6219669 COMBIMET 19" 6Ux14.37"

M6219669

COMBIMET 19" 6Ux14.37" Modern ventilated aluminum 19" rack case with an anodized front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.

Version With ventilation

Supply 19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.

Close

M6219669

COMBIMET 19" 6Ux14.37" Aluminum
Black RAL 9005
10.47″x19.00″x14.37″
  • Technical Data
  • Drawings / Info
  • Purchasing Data
Material
Color
Natural finish
Standards
REACH compliant
RoHS compliant
Width
13.189″
335 mm
Depth
12.992″
330 mm
Height
0.059″
1.5 mm

Catalog Pages

Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

Weight/1 part
0.5 kg
Customs tariff number
(METCASE product)
76061292
Country of manufacture
U.K.