Advanced Search Part-No.
Login / Registration Your location/language , English



Every METCASE standard enclosure – be it TECHNOMET or any other model – is designed to require as little customization as possible. Many clients opt for a standard housing then specify custom front and rear panels. On TECHNOMET, the front panel must be specified as an accessory while the rear panel is included. Both these flat panels are easy to customize.

Every enclosure will require some form of CNC machining to allow the installation of controls, a power supply and other connectors. In April 2022, we announced a six-figure investment in three new state-of-the-art punching, forming and milling machines to further accelerate production.

CNC punching includes holes, slots, half shears, dimples, burst holes and vent louvres. CNC folding includes corners, tabs, flanges, Dutch folds and joggles. Find out more here and see examples.

For CNC milling, drilling and tapping, our machining tolerance is +/- 0.004" (0.1 mm) for cut-outs, recessed areas and holes of lengths up to 1.181" (30 mm), and +/- 0.006" (0.15 mm) for lengths up to 4.724" (120 mm). The minimum corner radius is 0.039" (1 mm). Find out more and see examples.