19" Enclosures
Technomet
Advanced and highly attractive instrument enclosures for desktop and portable electronics. Internal chassis for slide-in PCBs.Your selection is shown below.
M6427324
The case is supplied with a rear panel and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.
Version Without handle/bail arm
Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.
M6427324
Technomet R215Anthracite RAL 7016
10.83″x9.84″x5.91″
M6427325
The case is supplied with a rear panel, two ABS side handles and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.
Version Without handle/bail arm
Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.
M6427325
Technomet R215Light gray RAL 7035
10.83″x9.84″x5.91″
M6427326
The case is supplied with a rear panel, two ABS side handles and four ABS feet with tilt legs. Ventilation slots are provided in the base and rear panel. Order front panels separately.
Version Without handle/bail arm
Supply Front bezel (x2), top cover, base and chassis assembly, rear panel, front trim (x2), rear trim (x2), trim clips (x8), ABS feet (x4), ABS tilt legs (x2), M3 x 6 mm (x2), M3 x 8 mm (x8), M4 x 16 mm (x8). Supplied assembled.
M6427326
Technomet R215Traffic white/traffic gray A RAL 9016/7042
10.83″x9.84″x5.91″
Accessory
M5600010
Pack of 100 M3 x 6 mm pan head pozi drive screws. Used for fitting PCBs and mounting plates to the threaded standoffs in our standard enclosures: TECHNOMET, MINIMET
Also suitable for use in combination with M5600001 PCB Mounting Kit, to secure PCBs to the plastic mounting pillars. Fixing points are provided in the following enclosures for this kit: COMBIMET 19", VERSAMET 19", UNIMET 19", UNIDESK, UNIMET, UNIMET-PLUS, DATAMET
These screws can also be used to replace the standard slotted case assembly screws supplied with our UNICASE enclosures — if pozi drive screws are preferred.
Additionally, this screw pack may be useful if your enclosure has been customized with M3 threaded inserts and pillars.
Supply 100 M3 x 6 mm pan head fixing screws (pozi drive PZ1).
M5600010
PCB Fixing Screws, M3Zinc coated
0.24″
M6400704
Supply Front panel (fixings supplied with the cases).
M6400704
Front Panel 215Matt anodized
9.72″x0.08″x5.54″
M6490010
| Technomet Model | Guides required per PCB | PCB positions in case |
|---|---|---|
| R210/R210H | 4 | 5 |
| R212/R212H | 4 | 7 |
| R215S/R215H | 4 | 9 |
| R310/R310H | 4 | 5 |
| R312/R312H | 4 | 7 |
| R215S/R215H | 4 | 9 |
Supply 1 PCB guide
M6490010
PCB Guide, 4.00"Natural finish
4.00″x0.30″x0.14″