Advanced Search Part-No.
Login / Registration Your location/language , English
M5900020 Front panel kit (2U)

M5900020

Front panel kit (2U)

Anodized aluminum front panel kit for 2U Mettec and Unimet 19" cases. Supplied with two snap-in ABS trims which hide the assembly screws and act as a guide for membrane keypads or product labels.

Supply

Front panel, 2 trims (fixings supplied with the cases)

  • To be used for
M5619225 UNIMET 19" 2Ux11.02"

M5619225

UNIMET 19" 2Ux11.02" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619225

UNIMET 19" 2Ux11.02"
product added to your basket
Aluminum
Light gray/window gray RAL 7035/7040
3.46″x19.00″x11.02″
M5619235 UNIMET 19" 2Ux14.96"

M5619235

UNIMET 19" 2Ux14.96" Modern high quality 19" rack case with integrated 'comfort handles'. All aluminum design with highly attractive front bezel and fabricated case body. Removable base and rear panels for easy access. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panel separately.

Supply 19" front bezel, top cover, base panel, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x6), M3 x 8 mm (x6) and M3 x 8 mm (x4). Supplied fully assembled.

Close

M5619235

UNIMET 19" 2Ux14.96"
product added to your basket
Aluminum
Light gray/window gray RAL 7035/7040
3.46″x19.00″x14.96″
M5920015 METTEC 19" 2Ux6.59"

M5920015

METTEC 19" 2Ux6.59"

Modern and robust 19" rack case with integrated 'comfort handles'. All aluminum design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Front bezel painted in light grey, RAL 7035. Side extrusions, top, base and rear panels are supplied coated in Iridite NCP clear conductive finish. The enclosure can be supplied fully painted on request.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x8), M3 x 8 mm (x4). Suppled assembled.

Close

M5920015

METTEC 19" 2Ux6.59"
product added to your basket
Aluminum
Light gray RAL 7035
3.46″x19.00″x6.59″
M5920025 METTEC 19" 2Ux10.35"

M5920025

METTEC 19" 2Ux10.35"

Modern and robust 19" rack case with integrated 'comfort handles'. All aluminum design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Front bezel painted in light grey, RAL 7035. Side extrusions, top, base and rear panels are supplied coated in Iridite NCP clear conductive finish. The enclosure can be supplied fully painted on request.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x8), M3 x 8 mm (x4). Suppled assembled.

Close

M5920025

METTEC 19" 2Ux10.35"
product added to your basket
Aluminum
Light gray RAL 7035
3.46″x19.00″x10.53″
M5920035 METTEC 19" 2Ux14.46"

M5920035

METTEC 19" 2Ux14.46"

Modern and robust 19" rack case with integrated 'comfort handles'. All aluminum design with attractive die cast front bezel, extruded side panels with internal PCB/chassis guide rails, rear panel and flat top and base panel. Open front panel aperture means the case does not have to be removed from the rack in order to access the electronics. Base panel is punched to accept accessory tilt feet. Order front panels separately.

Front bezel painted in light grey, RAL 7035. Side extrusions, top, base and rear panels are supplied coated in Iridite NCP clear conductive finish. The enclosure can be supplied fully painted on request.

Supply Front bezel, side extrusion (x2), rear panel, top panel, base panel, M4 x 16 mm (x8), M3 x 8 mm (x4). Suppled assembled.

Close

M5920035

METTEC 19" 2Ux14.46"
product added to your basket
Aluminum
Light gray RAL 7035
3.46″x19.00″x14.47″
  • Technical Data
  • Drawings / Info
  • Purchasing Data
Material
Color
Matt anodized
Standards
REACH compliant
RoHS compliant
Width
15.453″
392.5 mm
Height
0.079″
2 mm
Depth
2.642″
67.1 mm

Catalog Pages

Drawings

3D Models

Weight/1 part
0.15 kg
Customs tariff number
(METCASE product)
76061292
Country of manufacture
U.K.